Posted: Sat Aug 25, 2012 18:59 Post subject: how to limit bandwith
hi i have seen this
http://www.dd-wrt.com/demo/QoS.asp
so i decided to install dd-wrt over my TP-Link TL-WR741ND
but after install here how my qos page look like this
what should i do now?
all i want is to split internet speed with my bro
here my internet speed test result from www.speedtest.net
DWN 1.72 mbps UPL 0.42
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sun Aug 26, 2012 1:02 Post subject:
You don't, in order to have QoS like that on the bottom of this post, you need a unit that has "paid support" from the manufacturer & even then, not ALL units from that specific manufacturer are supported such as D-Link DIR-615 units, to my knowledge only the revision E series are while C & D are NOT.
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Sun Aug 26, 2012 3:31 Post subject:
M., by looking at the date of this dd-wrt version you have seems pretty old. upgrade first man... _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Sun Aug 26, 2012 17:17 Post subject:
M currently running latest ddwrt on wndr3700v2 and am able to limit bandwidth to users as I wish. Try upgrading first and hard reboot and go back to the qos page. _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
I have found it under this path
*******************************************************
Downloads\others\eko\BrainSlayer-V24-preSP2\2012\07-20-12-r19519\tplink_tl-wr741ndv1
*******************************************************
after update QOS STILL LOOK LIKE THE OLD ONE
========================
Sorry For My Bad English
========================
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Mon Aug 27, 2012 19:29 Post subject:
i guess you need a wndr3700 then...i dont use the paid version and im able to throttle bandwith as i need... _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Mon Aug 27, 2012 22:07 Post subject:
It will still work, even without the special QoS, you can assign you and your bro's network adapters to a static IP or just use the MAC address and prioritize those how you like..
As far as someone from here telling you the exact equation you would need to feed into QoS to do what you want, chances are slim there as we aren't physically there to set it up for you, so you'd need to play around with it and see if you can set it up properly to work for your network. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ
is there any tutorial on how to do it ?
i have seen this link in wiki page
http://www.dd-wrt.com/wiki/index.php/Quality_of_Service
i tried to do so
but i can't make it work
here is my speedtest result
((DOWN = 1.66Mbps UP = 0.31Mbps))
my network have 3 pc`s
2 connected with lan ports
and 1 laptop with wifi
all i want is to limit
download speed for each
pc to 120 kb\s