Posted: Fri Aug 24, 2012 0:35 Post subject: Netgear N-600 + FOSCAM Port Forward Issues
Hi All.
I am trying to setup a nursery cam with a Foscam FI18910W to be accessed from internet.
I have issues when it comes to setting up the port forward part. I've tried different ports, even checked with my ISP for blocked ports (they replied none are blocked).
I got the Camera with a Static IP and on the NAT/QOS I have the port I selected (92) forwarded and enabled.
Now everytime I try to access through browser with http://MyISPip:PORT it times out.
On the flip side I can access and view the camera feed with no issues with localIP:port.
Router is a Netgear N600 with DD-WRT 17990 build.
ISP is Time Warner Cable.
Posted: Fri Aug 24, 2012 18:35 Post subject: Can Access CAM from internet!
I now can access the camera from the internet IP address by using http://myISPip:port
I was able to assign a no-ip.org address and it works as well.
BUT all this is in another router without DD-WRT!!! (D-Link 635 on stock firmware).
So definitively this is an issue with either the firmware build for the Netgear WNDR3400 N 600 router (I'm using a mini build 17990). I read a loopback issue on another post.
Anyone aware of any fix for this or another build that works??
or
Is there some option along the firewall settings that I have to activate in order to allow incoming connections??
Joined: 19 May 2007 Posts: 283 Location: Los Angeles, CA USA
Posted: Fri Aug 24, 2012 23:38 Post subject:
i have a foscam fi8918w currently connected to my network and able to access it through anywhere in the world with a internet connection. how can i help? _________________ e3200 stock <- waiting for support
wrt400n v26 std with modded antennas