[tavus]

Hi All.

I am trying to setup a nursery cam with a Foscam FI18910W to be accessed from internet.

I have issues when it comes to setting up the port forward part. I've tried different ports, even checked with my ISP for blocked ports (they replied none are blocked).

I got the Camera with a Static IP and on the NAT/QOS I have the port I selected (92) forwarded and enabled.

Now everytime I try to access through browser with http://MyISPip:PORT it times out.

On the flip side I can access and view the camera feed with no issues with localIP:port.

Router is a Netgear N600 with DD-WRT 17990 build.
ISP is Time Warner Cable.

Any clues on what I could be doing wrong?

[tavus]

OK, so could someone enlighten me here.

If I type on my browser within the LAN the WAN IP. Should it take me to the router login page? or does that only work from outside the LAN?

[tavus]

After double checking some settings now I go to any Open Port Check Tool and no matter what # I use, it shows:

Success: I can see your service on 72.182.XX.XXX on port (92) Your ISP is not blocking port 92

So that means that the port forward functionality is there right?

Still when I try to access the ISPip:port on the browser for see the live feed it times out.

Could it be a loopback issue related to the router?

[tavus]

I now can access the camera from the internet IP address by using http://myISPip:port

I was able to assign a no-ip.org address and it works as well.

BUT all this is in another router without DD-WRT!!! (D-Link 635 on stock firmware).

So definitively this is an issue with either the firmware build for the Netgear WNDR3400 N 600 router (I'm using a mini build 17990). I read a loopback issue on another post.

Anyone aware of any fix for this or another build that works??

or

Is there some option along the firewall settings that I have to activate in order to allow incoming connections??

[lceron]

i have a foscam fi8918w currently connected to my network and able to access it through anywhere in the world with a internet connection. how can i help?

[tavus]

Thanks Iceron. My issue is resolved.

Found the solution on this thread.