Awesome! I'm looking forward to having dd-wrt on my router
Yes,
So far all is working, so I think a release should be soon... I would definatly go for the E1200 version 2, as version 1 has 4 meg flash no bin over mini can be loaded on it.
Version 2 has a 8mb flash
you can tell version 2 cause the mac starts with
20:AA
Well that confuses me. The bottom of router says its the e1200 v2 but the mac starts with 58:6D
Well I cannot see that mine states anywhere about the version (Just E1200) and the MAC of mine starts with 58:6D as well...
is there a proper way to make sure which version the router is before flashing it with the dd-wrt software?
If the router says E1200 v2, then it is version 2, and you should be safe to flash the Version2 bin.. If you flash the wrong bin, the OEM software should not let you flash it because of the wrong code pattern..
Remember Version 1 is 4mb Flash, Version 2 is 8mb flash. That being said on Version 1 you cannot use any build bigger than mini.
Well that confuses me. The bottom of router says its the e1200 v2 but the mac starts with 58:6D
Well I cannot see that mine states anywhere about the version (Just E1200) and the MAC of mine starts with 58:6D as well...
is there a proper way to make sure which version the router is before flashing it with the dd-wrt software?
If the router says E1200 v2, then it is version 2, and you should be safe to flash the Version2 bin.. If you flash the wrong bin, the OEM software should not let you flash it because of the wrong code pattern..
Remember Version 1 is 4mb Flash, Version 2 is 8mb flash. That being said on Version 1 you cannot use any build bigger than mini.
-Fractal
Hi Fractal, thanks for your reply. I suppose I have the V1 one then... is it ok to use the file provided here
Hey, does the update to first post means its past the developmental stage? And will there be a entry on the Wiki soon? Lastly, is that link in the first post what we need to use to install it(im asking since you changed on 4/16 that it is ported, but the items in there are from 4/7)
Hey, does the update to first post means its past the developmental stage? And will there be a entry on the Wiki soon? Lastly, is that link in the first post what we need to use to install it(im asking since you changed on 4/16 that it is ported, but the items in there are from 4/7)
yes the link at the top of the post is for the most recent supported file for the 1200
Hey man.
I also got an Linksys E1200 with MAC 58:6D:8F with Firmware-Version: 1.0.02 - is it v1 or v2
Is there now a good working modified FW, Fractal ?
The attached .BIN in the #1 post, the #1 file, can I upgrade the FW thru the normal Upgrade process with my browser ?
Thanks for a replay.
To be honest I have not seen those in my area with the 58:6D mac, if you flip the router over next to the serial number it will say v2 or version2 if its a version 2 router... if its version one it will show the serial number only.
The link at the top of the forum is for the latest dd-wrt builds for this device.
Thanks for your replay. I don't see any v2 in such a field. I attach an image so you can also check it out.
What can I do with my router now ? Can I flash it with one of your CFW's ?
Can I just download the #1 BIN NVRAM, go to 192.168.1.1 - update Firmware - choose the BIN and let the magic work ?