Lan ports not active on WR850g

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3
Author Message
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Wed Jun 27, 2007 3:52    Post subject: Reply with quote
tftp latest ...sp3_wr850.bin at boot (at 192.158.10.1), then reset button will work to restore fac. def.
Sponsor
dannyg
DD-WRT Novice


Joined: 25 Jun 2007
Posts: 6

PostPosted: Wed Jun 27, 2007 17:45    Post subject: Reply with quote
Ok, I will try that.

I've tried tftp'ing the sp2 build, but it doesn't load, the power light just stays red. I can only tftp the motorola 6.1.4 build after i remove the header using a hex editor.

Do i have to do something similar to dd-wrt builds?
dannyg
DD-WRT Novice


Joined: 25 Jun 2007
Posts: 6

PostPosted: Thu Jun 28, 2007 3:22    Post subject: Reply with quote
Eko wrote:
tftp latest ...sp3_wr850.bin at boot (at 192.158.10.1), then reset button will work to restore fac. def.


OK, I tftp'ed the latest build(had to remove the header from the bin file)
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Motorola/WR850G

The router booted up, but still its same as before. Any combination of passwords are not working. The reset switch is same as before, it doesn't properly reset( all the lights just light up and go off). I'm running out of ideas Sad
dmt411
DD-WRT Novice


Joined: 19 Sep 2007
Posts: 10

PostPosted: Wed Sep 19, 2007 15:38    Post subject: nvram and I are confused!! Reply with quote
Tried to follow steps provided by Eko only. I didn't read on to see Eko's reply to torontofish about nvram set vlanports="0 1 2 3 4 5*" tried this then tried eko's nvram set vlan0ports="0 1 2 3 5*" now nvram get vlan0ports=0 and nvram get vlan1ports=4

What should these look like. I have WR850G v2. I can still connect via wireless but not wire.

Thanks
Seth7
DD-WRT Guru


Joined: 16 Aug 2006
Posts: 670
Location: DN17IQ

PostPosted: Fri Apr 13, 2012 6:04    Post subject: Reply with quote
Eko wrote:
Motorola v2 or v3 needs:
Code:
nvram set vlan0ports="0 1 2 3 5*"
nvram set vlan1ports="4 5"
nvram commit
reboot


Shoot .... not doing it for me ...
Might have a too new build
Build 13064

_________________
WRT54G,GS v1.1, V2, V3 V4, V5
WR850G V2, V3
Fonera 2100
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Fri Apr 13, 2012 6:18    Post subject: Reply with quote
Seth7, see http://www.dd-wrt.com/phpBB2/viewtopic.php?p=681394#681394 for wan fix
Seth7
DD-WRT Guru


Joined: 16 Aug 2006
Posts: 670
Location: DN17IQ

PostPosted: Fri Apr 13, 2012 6:56    Post subject: Reply with quote
Ok ... which build would you suggest?
_________________
WRT54G,GS v1.1, V2, V3 V4, V5
WR850G V2, V3
Fonera 2100
Eko
DD-WRT Developer/Maintainer


Joined: 07 Jun 2006
Posts: 5772

PostPosted: Fri Apr 13, 2012 10:22    Post subject: Reply with quote
Seth7 wrote:
Ok ... which build would you suggest?

You can start with this http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/V24_TNG/svn15943-snow/dd-wrt.v24-15943_VINT_std-nokaid.bin
Seth7
DD-WRT Guru


Joined: 16 Aug 2006
Posts: 670
Location: DN17IQ

PostPosted: Fri Apr 13, 2012 19:59    Post subject: Reply with quote
Is that a generic of more specific for wr850g??
_________________
WRT54G,GS v1.1, V2, V3 V4, V5
WR850G V2, V3
Fonera 2100
Seth7
DD-WRT Guru


Joined: 16 Aug 2006
Posts: 670
Location: DN17IQ

PostPosted: Mon Apr 16, 2012 8:58    Post subject: Reply with quote
Still no access to the other 3 lan ports .... not sure about wan.
Im just getting access via wireless....

_________________
WRT54G,GS v1.1, V2, V3 V4, V5
WR850G V2, V3
Fonera 2100
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum