Posted: Wed Feb 22, 2012 2:40 Post subject: Some bug～～～
Very good~~~
but has some bug.
1.The usb storage can not be work also the service is turn on.
2.The hardware button to turn off the wlan can not be work.
3.The wifi power can not change only on 17dbm.
I look forward to posting results of the bridge test with this router/firmware.
Client bridge has been up, stable and fast for well over 24 hours. Had a little trouble with the firewall at first but set it back up from scratch and everything is acting ok now.
Hey, I was hoping for some help, I recently installed these files and running better than stock, although my throughput is down to 35Mb on my 50Mb connection, when I use my Linksys on stock firmware I get the full 50Mb when PC's wired, only 35 on the DD-WRT unit, what I was hoping to find out is once you follow the instructions here do you install the latest version of ddwrt or is this firmware the only one that currently works on this router?
Thanks in advance.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Thu Mar 08, 2012 22:56 Post subject:
sudwodin wrote:
USB is not working, not on the lamp
3G Huawei modem is not connected
more details please. which huawai device (usb id's?)
did you enable usb first?
by the way. i uploaded a new preview version to the server some minutes ago .so new files are up _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Posted: Fri Mar 09, 2012 0:57 Post subject: error trying to flash upgrade to wnr2000 v3
Hello: I'm new to the forum,I just purchased a Netgear wnr2000 v3. Have been reading the forum regarding ddwrt for this version. I am attempting to flash via the webgui "router upgrade" I select the factor ww and NA image and I receive message upgrade failed check file.
this unit is just out of the box and attempting to flash in that state. Am I missing a step here? Thanks for the input and work of all on this forum. Thanks
BrainSlayer wrote:
eko just wrote me some hours ago. attached the first working images. since i dont have the hardware its likelly that not all led's etc are now working
reset button seems to work so far and the rest should work as well. but give it a try by yourself.
first upgrade from netgear webgui with the wnr2200-factory image. after dd-wrt bootet up, use the webflash file to upgrade again from dd-wrt webinterface. the netgear firmware has a firmware size limitation which prevents the use of all flash memory which would reduce the feature set.
