NEW Fractal BUILDS 17949 *CLOSED* Moving on to Devel Thread

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6 ... 10, 11, 12  Next
Author Message
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Fri Nov 25, 2011 16:53    Post subject: Reply with quote
lawleo wrote:
u did what we can't do...thx Fractal


Thank you, I think I have fixed Ext2/3 loading in the filesystem... I was right it gets trumped.. I am going to change the files in this forum with my mod to 17924
I created a vfat, ext2, ext3, this time to test ...

New updated bins are on page 4


here is my output now Smile

Code:

--- /dev/discs/disc0/disc
Block device, size 7.521 GiB (8075120640 bytes)
DOS/MBR partition map
Partition 1: 505.0 MiB (529553408 bytes, 1034284 sectors from 62)
Type 0x0B (Win95 FAT32)
FAT16 file system (hints score 4 of 5)
Volume size 504.7 MiB (529260544 bytes, 64607 clusters of 8 KiB)
Volume name ""
Partition 2: 505.1 MiB (529585152 bytes, 1034346 sectors from 1034346)
Type 0x83 (Linux)
Ext2 file system
UUID 7979A211-8E93-4389-9C7B-B959772788E9 (DCE, v4)
Volume size 505.1 MiB (529584128 bytes, 517172 blocks of 1 KiB)
Partition 3: 505.1 MiB (529585152 bytes, 1034346 sectors from 2068692)
Type 0x83 (Linux)
Ext3 file system
UUID D6CFDBF4-0E3D-45C9-A3BD-24FEA9D6B39D (DCE, v4)
Volume size 505.1 MiB (529584128 bytes, 517172 blocks of 1 KiB)
FAT32 file system (hints score 4 of 5)
Volume size 7.506 GiB (8059359232 bytes, 1967617 clusters of 4 KiB)
Status: Mounted on /mnt
Status: Not mounted


-Fractal
Sponsor
lawleo
DD-WRT Novice


Joined: 17 Sep 2011
Posts: 25

PostPosted: Fri Nov 25, 2011 17:56    Post subject: Reply with quote
Oops.... still report the partition in USB is ext4... (I'm sure I hv format that in ext3 because I just check it in ubuntu.

using standard version
dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas.bin

--- /dev/discs/disc0/disc
Block device, size 1000 MiB (1048576000 bytes)
DOS/MBR partition map
Partition 1: 512 MiB (536870912 bytes, 1048576 sectors from 2048)
Type 0x83 (Linux)
Ext4 file system
Volume name "Optware"
UUID 42770D79-761D-4D4E-8850-FC9021248904 (DCE, v4)
Volume size 512 MiB (536870912 bytes, 131072 blocks of 4 KiB)
Partition 2: 64 MiB (67108864 bytes, 131072 sectors from 1050624)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 63.99 MiB (67100672 bytes, 16382 pages of 4 KiB)
Partition 3: 423 MiB (443547648 bytes, 866304 sectors from 1181696)
Type 0x0B (Win95 FAT32)
FAT32 file system (hints score 5 of 5)
Volume size 422.2 MiB (442662912 bytes, 108072 clusters of 4 KiB)
Volume name ""
Status: Not mounted
Status: Not mounted


=== dmesg ===
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
usb-storage: device scan complete
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0

_________________
Belkin N600 Play Max HD F7D4301v1
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Fri Nov 25, 2011 18:18    Post subject: Reply with quote
Ascott and I are still testing... I have power cycled (3) times and mine is working. Here is a screenshot of my router. However ascott is going to confirm on a few of his test routers as well. It might be something as simple as a power cycle let route boot then insert usb drive first time.

-EDIT- Testing a optware drive now... will let everyone know when I get that completed


Last edited by Fractal on Fri Nov 25, 2011 19:25; edited 1 time in total
lceron
DD-WRT User


Joined: 19 May 2007
Posts: 283
Location: Los Angeles, CA USA

PostPosted: Fri Nov 25, 2011 19:24    Post subject: Reply with quote
great release and thanks for the fix fractal, kong, and others. would you guys also be working other issues currently pending for fixes such as this loopback annoyance. i've tried to put firewall code provided by phuzion however it sometimes works and sometimes it doesn't for me. i am currently testing your release on my wrt610nv2 converted into e3000.
_________________
e3200 stock <- waiting for support
wrt400n v26 std with modded antennas
djroby19
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 34
Location: Italy

PostPosted: Fri Nov 25, 2011 19:36    Post subject: Reply with quote
Great Fractal upgraded to DD-WRT v24 build-sp2 (11/25/11) std-usb-nos
(SVN revision 17924) ... I know you're busy but you could insert type of custom themes for E4200? Thanks for everything ....... Laughing Laughing

_________________
Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Fri Nov 25, 2011 20:44    Post subject: Reply with quote
My wife is killing me to go shoping.... Want to say HUGE thanks to ascott him and I have been working on this for weeks!!!.

we either got it or are really close...

Here is a nv60k bin for those that have ext2/3 to try... please let me know if it works I will do the others, wife is putting the foot down and wants to shop
lol..

Edit: 11/28 new working bins page 6

-Fractal


Last edited by Fractal on Tue Nov 29, 2011 6:10; edited 1 time in total
Pharaoh
DD-WRT User


Joined: 12 Aug 2006
Posts: 485

PostPosted: Fri Nov 25, 2011 22:38    Post subject: Reply with quote
Found a little minor oddness when i tested it.

Likely more cosmetic then function.

Wireless set to AP/NG mixed /channel 2/lower leads to a display in the status windows of 0 + 2.

Odd glitch i never seen before.

I also noticed abit of stuttering at first on the wireless which smoothed out after a min or so on my tablet.

Ps..Hope you survived the shopping Smile.
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sat Nov 26, 2011 14:50    Post subject: Reply with quote
17924_std_usb_nas (non-nv60k) running on an rt-n16

Usb drive still reports the opt partition as ext4 and will not mount.

Reading the threads, I power cycled a few times, booted the router and then inserted the usb drive, etc.. didn't change anything.

As posted before, all partitions are formatted ext2 (except swap)

--- /dev/discs/disc0/disc
Block device, size 3.773 GiB (4051697664 bytes)
DOS/MBR partition map
Partition 1: 1.003 GiB (1077479424 bytes, 2104452 sectors from 63)
Type 0x83 (Linux)
Ext4 file system
Volume name "opt"
UUID BA36082A-2027-49B1-96C9-717F408D1D9F (DCE, v4)
Volume size 1.003 GiB (1077477376 bytes, 263056 blocks of 4 KiB)
Partition 2: 509.9 MiB (534643200 bytes, 1044225 sectors from 2104515)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 509.9 MiB (534634496 bytes, 130526 pages of 4 KiB)
Partition 3: 258.9 MiB (271434240 bytes, 530145 sectors from 3148740)
Type 0x83 (Linux)
Ext2 file system
Volume name "jffs"
UUID AF718292-E079-4B7D-85D7-97DB83F1D06C (DCE, v4)
Volume size 258.9 MiB (271433728 bytes, 265072 blocks of 1 KiB)
Partition 4: 2.015 GiB (2163248640 bytes, 4225095 sectors from 3678885)
Type 0x83 (Linux)
Ext4 file system
Volume name "data"
UUID 7600C569-6489-48D5-ABE8-13126DB0DD85 (DCE, v4)
Volume size 2.015 GiB (2163245056 bytes, 528136 blocks of 4 KiB)
Status: Not mounted
Status: Not mounted

_________________
[Moderator Deleted] Shocked
rhank110
DD-WRT Novice


Joined: 23 Nov 2011
Posts: 2

PostPosted: Sat Nov 26, 2011 19:52    Post subject: Re: NEW BINS!!!! Reply with quote
Thanks for the nv64k builds Fractal!



Fractal wrote:
EDIT: 11/25 Due to FEEDBACK on ext2/3 not mounting the bins are being changed from 17920 to 17924 with fractal ext2/3 fix PLEASE TEST!

Happy Holidays!!!!!

I am glad to announce that I was able to fix USB automount and USB drive detection for HEAD release subversion. This is not a kong mod(although his efforts are awesome!!) and works as it used to with some new features and device support. Funny thing is it was a super small line of code in a haystack of over 600+ changes to svn to narrow it down, and if you read up u can see how I spent most of my thanksgiving Smile

ok.... so..

1ST... KNOW YOUR ROUTER AND KNOW YOUR BUILD!!! I cannot stress this enough..

2nd... I am encluding NV60K, NV64K and regular K26 builds ..

(NV60K).. is for E2000/E3000/E3200/E4200
(NV64K).. is for NETGEAR WNDR-3400/4000 Routers..
Regular bin.. is for standard K26 routers..check dd-wrt wiki if unsure..

I am uploading std_usb_builds, and after I get some feedback I will update with mega builds.
skinlayers
DD-WRT Novice


Joined: 09 Nov 2011
Posts: 9

PostPosted: Sun Nov 27, 2011 7:03    Post subject: Reply with quote
May I humbly request an updated (17924) mega 60k build?
Laughing

As I use my E4200 as a WAP, I honestly don't really care about most of the features in the "mega" build, but having tcpdump is too useful to pass up!

Thanks!
skinlayers
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Sun Nov 27, 2011 8:51    Post subject: Reply with quote
wanted to update everyone and say thank you for testing, I feel the updates are really close...
Their are 2 different 17924 bins in this thread each may give different automount results...

-I will revisit the code monday, and post results of our findings as soon as they are available.

I believe the first 17924 bin in this thread automounted all FAT/NTFS ect partitions

the last bin was to address ext2/ext3 being mounted as ext4. Then I remember having to do the holiday shopping with the wife .... Hope everyone had a great holiday...

-Fractal
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1867
Location: Fortaleza Ce Brazil

PostPosted: Sun Nov 27, 2011 11:16    Post subject: Reply with quote
I am here again , since Fractal builds brick my 2 E3k ( 1 mounths ago )

no way i will give up ..


Lets Try Fractal again


Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 R7800 45229 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 45229 Cli Mesh
1 WZR1750 45229 AP Webserver OpenVPN Wireguard
1 DDx86 Vmware 40260
1 E3000 41027 K3 @500 WAP wifi client
BIOHazard87
DD-WRT User


Joined: 30 Mar 2007
Posts: 61
Location: Las Vegas, NV

PostPosted: Mon Nov 28, 2011 2:31    Post subject: Reply with quote
Using a E4200:

I moved to Fractal (dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas-nv60k) from Tomato, initially I was having good results, much faster download speeds, but with spotty range. Even in the same room I would drop to 1-2/3 bars.

Last night and today (right now) wireless is completely crashed. I'm posting now on LAN with wireless being broken. Only getting 11Mbps wireless rate on the DD-WRT status page.


As I type this, wireless just came back online, it was broken for about 5-10 minutes. I'm about considering either flashing back to the latest Tomato builds, or going back to stock Linskys 1.0.0.3 firmware as I had the least amount of issues on the stock firmware.



EDIT: My original post included the wrong file name, fixed it now.

EDIT2: Back on Linksys 1.0.0.3 firmware now. Much better wireless signal strength.

_________________
WRT1900AC V1 @ LEDE r4576-4.4
ascott
DD-WRT Novice


Joined: 17 Jun 2011
Posts: 11

PostPosted: Mon Nov 28, 2011 4:11    Post subject: Let's try these Reply with quote
Attached are std_usb_nas bins (nv60k and non-nv60k) built with 17924 and changeset 17841 reverted.

These are fractal-ascott bins. These bins were built with 4.1.2 toolchain. Fractal's last bins were built with linaro toolchain.

The current problem with USB (I think) for Broadcom users is with this check-in: http://svn.dd-wrt.com:8000/changeset/17841/

Basically, if you roll back that check-in, plus Fractal's memset fix in usb_hotplug.c, (which has already been accepted), that will get usb working like it was for people with opt drives and with ext2/3 filesystems as their first partition. (And I'm assuming vfat and friends, as well.)

More specifically, build with 17924, src/ruoter/disktype/detect.c rev 11093, and src/router/disktype/linux.c rev 11068.

This works for me and automounts opt drive like the old way.

Looking over changeset 17841, it seems that the addition of Ext4 support was not backward-compatible with Ext2/3 support for broadcom users who are still on the 2.6.24.111 kernel.

My suggestion is to revert that check-in until a more general solution may be found, or add preprocessor commands to only build ext4 support if linaro, otherwise don't build ext4 support.

Code:

root@wnr3500lUSB:~# cat /tmp/disktype.dump

--- /dev/discs/disc0/disc
Block device, size 7.469 GiB (8019509248 bytes)
DOS/MBR partition map
Partition 1: 6.842 GiB (7346767872 bytes, 14349156 sectors from 62)
  Type 0x83 (Linux)
  Ext2 file system
    UUID C875AAA6-1B17-4215-B6E8-C230B64B680B (DCE, v4)
    Volume size 6.842 GiB (7346765824 bytes, 1793644 blocks of 4 KiB)
Partition 2: 516.0 MiB (541012992 bytes, 1056666 sectors from 14349218)
  Type 0x82 (Linux swap / Solaris)
  Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
    Swap size 515.9 MiB (541003776 bytes, 132081 pages of 4 KiB)

Status: <b>Mounted on /opt</b>
Status: <b>Not mounted</b>



dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas-nv60k.bin
 Description:
std_usb_nas, nv60k, broadcom, 17924, 4.1.2 toolchain, 2.6.24.111

Download
 Filename:  dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas-nv60k.bin
 Filesize:  4.84 MB
 Downloaded:  700 Time(s)


dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas.bin
 Description:
std_usb_nas, broadcom, 17924, 4.1.2 toolchain, 2.6.24.111

Download
 Filename:  dd-wrt.v24-17924_NEWD-2_K2.6_std_usb_nas.bin
 Filesize:  4.84 MB
 Downloaded:  684 Time(s)



Last edited by ascott on Mon Nov 28, 2011 4:55; edited 1 time in total
gerald410
DD-WRT Novice


Joined: 21 Dec 2009
Posts: 5

PostPosted: Mon Nov 28, 2011 4:53    Post subject: Reply with quote
u/r with the fractal-ascott bin(nv60k version) Thx for the build.
Goto page Previous  1, 2, 3, 4, 5, 6 ... 10, 11, 12  Next Display posts from previous:    Page 5 of 12
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum