Request for support of DD-WRT on a OvisLink IP-1000R router

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions
Author Message
GigaWatt
DD-WRT Novice


Joined: 08 Sep 2011
Posts: 2

PostPosted: Thu Sep 08, 2011 0:47    Post subject: Request for support of DD-WRT on a OvisLink IP-1000R router Reply with quote
I'm really sorry if I posted this thread in the wrong section of the forum, but I read all of the rules and I really had no idea where to post this request except here. If the admins/mods feel this thread needs to be moved, please do so Wink.

As most of the threads and rules of the forum (and the main DD-WRT site) suggest, I made some pictures of the inside of the router and identified all of the ICs on the board (although I wasn't able to find datasheets from all of them :S). Here a very vague description of the ICs inside the router:

CPU: Amlogic AMRISC 9041-G
Ethernet Switch: IP175C LF
RAM Memory: EM36165TS-7G
CMOS Flash Memory: EN29LV040A-70JCP


I hope the info helps Wink. Now here are the pictures. If some you have any other questions regarding the router, I would be more than happy to answer them Wink.

















PS: I forgot to mention that it's not a wireless router, although the top cover might suggest this. It's only a 4 port Fast Ethernet SOHO router Wink.

PPS: I also filled the contact form on the main page with all of the required information, as suggested in the FAQ page Wink.
Sponsor
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7631

PostPosted: Thu Sep 08, 2011 2:38    Post subject: Reply with quote
Can not run dd-wrt, wrong cpu too start with and not enough flash or ram to run linux in.
_________________
Kernel panic: Aiee, killing interrupt handler!
GigaWatt
DD-WRT Novice


Joined: 08 Sep 2011
Posts: 2

PostPosted: Thu Sep 08, 2011 11:55    Post subject: Reply with quote
Yeah, I thought the CPU might be a problem :S. Maybe the kernel can be reconfigured to run on this CPU, but there is another problem, I can't find a datasheet on the CPU anywhere on the net, so I guess I'm stuck :S.

Actually, the RAM memory module is 4MB, it says so in the datasheet Wink, so I guess there is no problem in that part (as read on the main page DD-WRT needs at least 4MB of RAM in order to run properly).

Anyway, thanks for the quick reply Wink.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum