thanks alot mrMichelG for your interest to my problems
But now I've Remove the device from the network which is now at home with me
In the old images when the device was located on the network This was the configuration
and about this photo
the first client at a distance of 650 m
Second client at a distance of 520 m
Without any obstacles
they were connected by client mode with(enable wds)
and bridge/wds is still not work
Joined: 06 Jun 2006 Posts: 3771 Location: I'm the one on the plate.
Posted: Sat Sep 03, 2011 1:57 Post subject:
MichaelG tells you to do some things that might help your problem.
...Because, 2100m distance and using 29dB !!!! it is too much. Reduce the power to 15dB, and see how it works. If you dont have enough power, then try 18dB.
Also, try changing the channel, and give us printscreens of your configuration.
So what did you do ? You said "Fuck MichaelG's advice. Here, see my screen shots from my old configuration that was not working."
...In the old images when the device was located on the network This was the configuration..
Where did you find enough food to get this far ? It is obvious that your mamma sure was not feeding you anything to nourish your development.
_________________ http://126.96.36.199:8015 Streaming Week-End Disco. Station Ripper V 1.1 will do.
Hi GeeTek ! Lovely isn't it ? I can understand why Sash is "rude" ! Finally, the Darwin Awards will take care of those people... Why losing time, energy, for that ?
By the way, my 13Km link works fine and I am using a power of 16dB, I am pretty sure, that even with 12dB it should be fine, but from time to time, there is a strange issue, and everyone in the area does lose contact with the AP ! It could be some electrical motors used to pump water, as the AP is located just in the small facility where those pumps are installed...
Have fun ! Michel. _________________ 2x EOC-2160 - AP 2x14dB Yagy to 450m link
2x EOC-2160 - RP 2x17dB Panels - 2x 7Mbps
1x WRT54G v2.2 - V24-SP2 13577VPN Eko
All Senao EOC-2610 V1.10 Std 15362 BS
1x UBNT Bullet 2 - RP 18dB Panel - 11Mbps - 13Km link