[ultimatebuster]

My Buffalo WZR-HP-G300NH stops working after 2 Ubuntu computers connect to it.

Every client will simultaneously show that it's disconnected from the network. Any attempts to reconnect will end in failure. (Applies to both wired and wireless)

Any ideas?

firmware is stock DDWRT (supplied by buffalo), DD-WRT v24SP2-EU-US (08/19/10) std - build 1499

[alexatkinuk]

Well firstly the obvious, try a newer firmware.

Unless you need MAC address QoS or DDNS I would highly recommend the version in my signature.

I am puzzled why the official Buffalo version 16783 is still considered Alpha when there are known issues with the supposed STABLE version 14998.

If you absolutely need a Buffalo version then giving the Alpha version a try could be a reasonable idea, but I much prefer the standard DD-WRT myself over the Buffalo version.

The Buffalo DD-WRT are available at ftp://wzr-hp-g300nh:wzr-hp-g300nh@188.65.163.247/

WARNING:
Be sure your router IS an NH not an NH version 2 (NH2) before using the above firmware. The NH2 has different firmware.

[moonbug]

alexatkinuk

What does Alpha version mean?

Where will you find the NH2 tag, on the label sticker on on the web gui page?

Does the build 17201 fix the wireless client disconnection issue?