fabriciogcbh
DD-WRT Novice
Joined: 15 Apr 2010
Posts: 5
Location: Brazil
|
 Posted: Sun Jul 31, 2011 22:32 Post subject: |
 |
Hello, I'm with a similar problem on my ZCOM TG2521, I can not mount drive.
DD-WRT v24-sp2 (14/06/11) std - build 17201 (I've tested with all existing and I could not mount).
Do not set the device in /dev/. I tested with several USB pendrive, don't work.
dmesg without pendrive.
| Code: |
<5>[ 0.000000] Linux version 2.6.34.9-svn17089 (root@dd-wrt) (gcc version 4.5.2 (Linaro GCC 4.5-2011.02-0) ) #6040 Tue Jun 14 11:19:29 CEST 2011
<4>[ 0.000000] flash_size passed from bootloader = 8
<6>[ 0.000000] bootconsole [early0] enabled
<6>[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
<6>[ 0.000000] booting platform Atheros AR9130 rev 1 (0xb4)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 02000000 @ 00000000 (usable)
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00002000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00002000
<7>[ 0.000000] On node 0 totalpages: 8192
<7>[ 0.000000] free_area_init_node: node 0, pgdat 802b19c0, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 64 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype=squashfs noinitrd init=/sbin/init
<6>[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<4>[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00000000
<6>[ 0.000000] Readback ErrCtl register=00000000
<6>[ 0.000000] Memory: 29284k/32768k available (2196k kernel code, 3484k reserved, 555k data, 148k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:128
<0>[ 0.000000] irq init done
<4>[ 0.000000] plat_time_init: plat time init done
<6>[ 0.000000] Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
<4>[ 0.240000] Mount-cache hash table entries: 512
<6>[ 0.240000] NET: Registered protocol family 16
<4>[ 0.260000] bio: create slab <bio-0> at 0
<5>[ 0.270000] SCSI subsystem initialized
<6>[ 0.270000] usbcore: registered new interface driver usbfs
<6>[ 0.280000] usbcore: registered new interface driver hub
<6>[ 0.280000] usbcore: registered new device driver usb
<6>[ 0.290000] Switching to clocksource MIPS
<6>[ 0.290000] NET: Registered protocol family 2
<6>[ 0.300000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.300000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
<6>[ 0.310000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.310000] TCP: Hash tables configured (established 1024 bind 1024)
<6>[ 0.320000] TCP reno registered
<6>[ 0.320000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.330000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.330000] NET: Registered protocol family 1
<5>[ 0.340000] gpio_proc: module loaded and /proc/gpio/ created
<5>[ 0.340000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[ 0.350000] AR7100 GPIOC major 0
<5>[ 0.350000] init_vdso successfull
<6>[ 0.360000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.360000] msgmni has been set to 57
<6>[ 0.370000] io scheduler noop registered
<6>[ 0.370000] io scheduler deadline registered (default)
<6>[ 0.380000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[ 0.390000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[ 0.390000] console [ttyS0] enabled, bootconsole disabled
<0>[ 0.410000] guessed flashsize = 8M
<0>[ 0.410000] scanning for root partition
<0>[ 0.410000] ZCom quirk found
<0>[ 0.420000] ZCom quirk kernel offset 6684672
<0>[ 0.420000] bootloader size = 50000
<0>[ 0.430000]
<0>[ 0.430000] found squashfs at 50000
<5>[ 0.430000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[ 0.440000] 0x000000000000-0x000000050000 : "RedBoot"
<5>[ 0.440000] 0x000000050000-0x0000007d0000 : "linux"
<5>[ 0.450000] 0x000000050000-0x0000005a0000 : "rootfs"
<5>[ 0.450000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.460000] 0x0000005a0000-0x0000007d0000 : "ddwrt"
<5>[ 0.470000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[ 0.470000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[ 0.480000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[ 0.490000] 0x000000000000-0x000000800000 : "fullflash"
<6>[ 0.490000] PPP generic driver version 2.4.2
<6>[ 0.500000] PPP Deflate Compression module registered
<6>[ 0.500000] PPP BSD Compression module registered
<6>[ 0.510000] PPP MPPE Compression module registered
<6>[ 0.510000] NET: Registered protocol family 24
<6>[ 0.520000] PPPoL2TP kernel driver, V1.0
<6>[ 0.520000] IMQ driver loaded successfully.
<6>[ 0.530000] Hooking IMQ before NAT on PREROUTING.
<6>[ 0.530000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 0.540000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.980000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI controller
<6>[ 0.990000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bus number 1
<6>[ 1.030000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[ 1.050000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[ 1.050000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.060000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.070000] usb usb1: Product: Atheros AR91xx built-in EHCI controller
<6>[ 1.070000] usb usb1: Manufacturer: Linux 2.6.34.9-svn17089 ehci_hcd
<6>[ 1.080000] usb usb1: SerialNumber: platform
<6>[ 1.080000] hub 1-0:1.0: USB hub found
<6>[ 1.090000] hub 1-0:1.0: 1 port detected
<6>[ 1.090000] usbcore: registered new interface driver usbserial
<6>[ 1.100000] USB Serial support registered for generic
<6>[ 1.100000] usbcore: registered new interface driver usbserial_generic
<6>[ 1.110000] usbserial: USB Serial Driver core
<6>[ 1.120000] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
<4>[ 1.120000] u32 classifier
<4>[ 1.130000] input device check on
<4>[ 1.130000] Actions configured
<4>[ 1.130000] Netfilter messages via NETLINK v0.30.
<4>[ 1.140000] nf_conntrack version 0.5.0 (457 buckets, 1828 max)
<4>[ 1.150000] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 1.150000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 1.160000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[ 1.170000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 1.170000] nf_nat_rtsp v0.6.21 loading
<6>[ 1.180000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.180000] IPP2P v0.8.2 loading
<6>[ 1.180000] TCP westwood registered
<6>[ 1.190000] TCP hybla registered
<6>[ 1.190000] TCP vegas registered
<6>[ 1.190000] NET: Registered protocol family 17
<6>[ 1.200000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<6>[ 1.210000] All bugs added by David S. Miller <davem@redhat.com>
<4>[ 1.240000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
<6>[ 1.250000] Freeing unused kernel memory: 148k freed
<4>[ 4.550000] Writing 4
<4>[ 5.560000] Writing 6
<4>[ 5.750000] ath_mimo_hal: module license 'Proprietary' taints kernel.
<4>[ 5.760000] Disabling lock debugging due to kernel taint
<6>[ 5.780000] ath_mimo_hal: 0.9.17.1 (AR5416, REGOPS_FUNC)
<6>[ 6.390000] ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<6>[ 6.400000] wlan: 0.8.4.2 (Atheros/multi-bss)
<6>[ 6.400000] wlan: mac acl policy registered
<6>[ 6.410000] ath_rate_atheros: Version 2.0.1
<6>[ 6.410000] Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
<4>[ 6.420000] IRQ 2/wifi%d: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[ 6.650000] ar5416CheckEepromDef: Read Magic = 0x0060
<6>[ 6.650000] EEPROM being read from flash @0xbfff1000
<6>[ 6.660000] need_swap = False.
<6>[ 6.660000] Howl Revision ID 0xb4
<6>[ 6.670000] No MBSSID aggregation support
<6>[ 6.670000] ar5416InitMacAddr: mac address read failed: ff:ff:ff:ff:ff:ff
<4>[ 6.680000] DFS min filter rssiThresh = 18
<4>[ 6.690000] DFS max pulse dur = 131 ticks
<4>[ 6.690000] 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>[ 6.700000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 6.700000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 6.710000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 6.720000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 6.730000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 6.730000] 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>[ 6.740000] 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
<4>[ 6.740000] wifi0: mac 20.0 phy 10.1 radio 15.0
<4>[ 6.750000] wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>[ 6.750000] wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>[ 6.760000] wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>[ 6.770000] wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>[ 6.770000] wifi0: Use hw queue 8 for CAB traffic
<4>[ 6.780000] wifi0: Use hw queue 9 for beacons
<4>[ 6.780000] wifi0: Use hw queue 7 for UAPSD
<6>[ 6.780000] wifi0: Atheros AR9100 WiSoC: mem=0xb80c0000, irq=2
<6>[ 7.110000] Initializing USB Mass Storage driver...
<6>[ 7.110000] usbcore: registered new interface driver usb-storage
<6>[ 7.120000] USB Mass Storage support registered.
<6>[ 7.160000] usbcore: registered new interface driver usblp
<6>[ 8.890000] device br0 entered promiscuous mode
<4>[ 8.920000] ag7100_ring_free Freeing at 0x818c9000
<4>[ 8.920000] ag7100_ring_free Freeing at 0x81a2e000
<4>[ 9.940000] Writing 4
<4>[ 9.950000] ag7100_ring_free Freeing at 0x81a6b000
<4>[ 9.950000] ag7100_ring_free Freeing at 0x81a2e000
<4>[ 10.970000] Writing 4
<6>[ 10.980000] device eth0 entered promiscuous mode
<6>[ 10.990000] br0: port 1(eth0) entering learning state
<6>[ 11.000000] device br0 left promiscuous mode
<6>[ 11.010000] device br0 entered promiscuous mode
<6>[ 11.010000] device br0 left promiscuous mode
<6>[ 11.020000] device br0 entered promiscuous mode
<4>[ 11.160000]
<4>[ 11.160000] ath_numswbaperbc = 8(1)adj=76800
<6>[ 12.000000] br0: port 1(eth0) entering forwarding state
<4>[ 12.210000] ic->ic_cwm.cw_width :0, ic->ic_cwm.cw_extoffset: 0
<6>[ 15.280000] device ath0 entered promiscuous mode
<6>[ 15.280000] br0: port 2(ath0) entering learning state
<6>[ 15.550000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
<6>[ 15.560000] bonding: MII link monitoring set to 100 ms
<6>[ 16.290000] br0: port 2(ath0) entering forwarding state
<6>[ 16.620000] device eth1 entered promiscuous mode
<6>[ 16.640000] device eth1 left promiscuous mode
<6>[ 17.870000] etherip: Ethernet over IPv4 tunneling driver
|
dmesg with pendrive.
| Code: |
<3>[ 302.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
|
If I start the router with the USB connected, is the same message. "unable to enumerate USB device on port 1"
I lost two days trying to make it work, trying to start modules manually, without success, I've got no idea
My pendrive ID (from PC)
| Code: |
usb 1-2: new high speed USB device using ehci_hcd and address 5
usb 1-2: New USB device found, idVendor=0204, idProduct=6025
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
scsi10 : usb-storage 1-2:1.0
scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 2.00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 2068223 512-byte logical blocks: (1.05 GB/1009 MiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] Attached SCSI removable disk
|
Partition on my pendrive.
| Code: |
Name Flags Part Type FS Type [Label] Size (MB)
------------------------------------------------------------------------------------------------------------
sdb1 Primary Linux ext3 [opt] 32.48
sdb2 Primary Linux swap 32.48
sdb3 Boot Primary Linux ext3 [bkp] 930.23
sdb4 Primary Linux ext3 [jffs] 62.86
|
thanks for help. |
|
