How to limit both WAN and LAN/WLAN QoS?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
excel4x
DD-WRT Novice


Joined: 24 Feb 2007
Posts: 15

PostPosted: Sat Jul 30, 2011 0:51    Post subject: How to limit both WAN and LAN/WLAN QoS? Reply with quote
I have a repeater setup that is experiencing problems due to client saturation.

ISP:
__R1:
____R2a - PC1/PC2/PC3
____R2b - PC4

R1, R2a, R2b: routers running DD-WRT special 16785.
R2a/R2b are repeaters to R1.
PC1 and PC2 are wireless clients sending traffic to each other - e.g. itunes library updates, etc.

I set WAN side QoS to limit R2a and R2b, etc.
R1/R2a/R2b use RTS to prevent conflicts.
However, I do not have RTS control over PCs

Normal internet-based traffic flows properly and is throttled appropriately.
However, when PC1/PC2 are exchanging data at full speed, other internet communication becomes clogged. R1, R2a and R2b all experience losses.
This is because PC1-PC2 communication is not throttled.

If I use LAN/WAN QoS, PC1-PC2 communication is managed, but the aggregate bandwidth to R2a, R1, etc. is not managed.

How can I limit both client-client and WAN bandwith?
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum