How are the stylesheets (skins) configured?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions
Author Message
guru_florida
DD-WRT Novice


Joined: 06 Oct 2010
Posts: 1

PostPosted: Wed Oct 06, 2010 1:19    Post subject: How are the stylesheets (skins) configured? Reply with quote
I had quite a day. I bricked my Buffalo router. I had to wire in a TTL serial cable to the buf main board and tftp to get it restored.

I restored the June ddwrt from Buffallo FW which has the customized skin. It worked fine but had factory defaults. I restored a nvram.bin file from before I bricked it (it was an April ddwrt FW before I bricked it.) Now everything works, but my ddwrt management interface is plain text (cant find the stylesheets).

I figured it was just a config setting for the skin but I think Buffalo removed the skin selectbox because I cant find it anywhere.

I ssh'd into the box and found /www/style/buffalo and /www/style/pwc dir but they are empty. Based on the "source" of the web page, ddwrt is trying to reference the following style sheets:
style/elegant/style.css,
style/pwc/default.css
style/pwc/ddwrt.css

I cant find any css files on the device using *find*.

Anyone have some suggestions. I cant believe I unbricked a buffalo only to get stuck on a css file! :)

Colin



ddwrt-noskin.PNG
 Description:
 Filesize:  15.3 KB
 Viewed:  6914 Time(s)

ddwrt-noskin.PNG


Sponsor
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2430
Location: Third Rock from the Sun

PostPosted: Wed Oct 06, 2010 1:43    Post subject: Reply with quote
Clear your browser cache or try a different browser.
_________________
Peacock Thread-FAQ -- Firmware Recommendations -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Wed Oct 06, 2010 1:51    Post subject: Reply with quote
You shouldn't use nvram backups on different builds or devices. It should only be used for the same exact device running the same exact build that it was created with. Hard reset and reconfigure it.
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
bugcoder
DD-WRT Novice


Joined: 12 Apr 2011
Posts: 1

PostPosted: Tue Apr 12, 2011 10:09    Post subject: Solution Reply with quote
access by ssh and set:

nvram set router_style=buffalo (if you install de buffalo version)

or

nvram set router_style=elegant (standard ddwrt)
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11449
Location: Wherever the wind blows- North America

PostPosted: Tue Apr 12, 2011 12:33    Post subject: Reply with quote
exactly...if it is the non buffalo version of the software...and you have router_style=buffalo set...you will see the display you pictured above without any styling.

redhawk

_________________
I do NOT provide personal assistance through chat or phone....so please don't ask.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum