Mod MMC/SD Card

Post new topic   Reply to topic    DD-WRT Forum Index -> Matériels à base de Broadcom
Author Message
jump2
DD-WRT Novice


Joined: 12 Dec 2006
Posts: 5

PostPosted: Tue Dec 12, 2006 14:00    Post subject: Mod MMC/SD Card Reply with quote
Bonjour,

j'ai à ma disposition 2 bornes Linksys (WRT54G v2 et WRT54GS v4) que j'ai modifiées pour ajouter un lecteur de cartes SD/MMC en suivant les plans trouvés sur le site de OpenWRT.

Sur les 2 bornes, j'obtiens la même erreur, quelque soit la version du firmware utilisée (v23, v23 SP2 ou v24 bêta) :
Code:
(0)mmc: Device does not use old GPIO layout, trying to use new GPIO layout
(0)mmc: This board has no MMC mod installed!
(0)mmc: error in mmc_init(-1)


J'ai essayé avec une carte SD 128 Mo SanDisk et une carte MMC 32 Mo. Même résultat. Pas mieux sous OpenWRT RC3, RC4, RC5 ou RC6.

En effectuant un insmod mmc dans dd-wrt, j'obtiens comme message d'erreur :
Code:
(4)mmc: can't get major 121



J'ai vérifié la partie matérielle à l'aide de l'outil gpio et d'un multimètre et tout semble ok. Sur la v2 j'ai bien GPIO4 en entrée et GPIO 3, 5 et 7 en sortie et reliés aux bons balais du support de carte. Sur la v4, GPIO 5 est bien remplacé par GPIO 2.

Un "gpio disable" éclaire la LED associée (DMZ, orange ou blanche sur la v4).

Voilà, je ne vois pas d'autre élément que j'aurai testé à rajouter.

Cela m'étonne qu'un firmware comme dd-wrt qui supporte cette modification nativement soit erroné donc cela vient forcément de moi mais j'avoue ne pas voir où se trouve l'erreur.

De l'aide serait grandement appréciée Embarassed
Sponsor
klayme
DD-WRT Novice


Joined: 12 Sep 2006
Posts: 3

PostPosted: Sun Jan 28, 2007 21:59    Post subject: Reply with quote
hi

did you find the solution for this problem?
jump2
DD-WRT Novice


Joined: 12 Dec 2006
Posts: 5

PostPosted: Sun Jan 28, 2007 23:54    Post subject: Reply with quote
Yes, in fact it works now.

The problem was that the MMC connector I bought was not designed to handle SD cards. And I had only SD cards. Due to the differences (in shape) between those 2 formats, there wasn't any contact when I pulled SD card.
When I tested with an MMC card, as I had soldered the connector for the shape of SD cards, there wasn't any contact any more for MMC too.

So I soldered the connector correctly and then put an MMC card and it worked immediately Embarassed
SD cards cannot be plugged anymore but that doesn't matter Smile
klayme
DD-WRT Novice


Joined: 12 Sep 2006
Posts: 3

PostPosted: Mon Jan 29, 2007 14:36    Post subject: Reply with quote
oki....
thanks a lot!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Matériels à base de Broadcom All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum