Joined: 06 Jun 2006 Posts: 6957 Location: Dresden, Germany
Posted: Sun Jan 28, 2007 19:39 Post subject:
dd-wrt should work on it. just try it. if it boots, it works. if you have troubles with ethernet etc. gimme the lspci output _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 24 Oct 2006 Posts: 1447 Location: Vaasa, Finland
Posted: Mon Jan 29, 2007 12:27 Post subject:
thanks for the reply BS..but i wanted to know...it doesnt have a hard drive..also which POrt is WAN when i install dd-wrt x86 on it??
WAN is bydefault on eth0, whichis first network card DD-WRT finds, but you can also select from webinterface what eth to use as WAN. _________________ Site 1:
P3 1GHz Coppermine with DD-WRT v24 as main router
2x Buffalo WHR-HP-G54 with DD-WRT v24 as AP
AMD64 4200+ Dualcore AM2 with DD-WRT v24 as main router
Buffalo WHR-HP-G54 with DD-WRT v24 as AP
hello there all thanks again for the support..i wanted to know if i installed dd-wrt x86 on it..will i be able to use all the 3 mini PCI's as different AP's or running one CM9 at 2.4 GHz and the other at 5 Ghz or soemthing? will dd-wrt support it??
can i connect the output of the CM9 to an 2.4 ghz amp??