reight now it has a 4.8 ghz radio but since it has Microtick Routerboard 11 i thoutht maybe u cud put another b/g PCI card...will a normal Laptop PCI card work??
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sun Jan 28, 2007 19:39 Post subject:
dd-wrt should work on it. just try it. if it boots, it works. if you have troubles with ethernet etc. gimme the lspci output _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Jan 29, 2007 13:23 Post subject:
wifi_is_simple wrote:
thanks for the reply BS..but i wanted to know...it doesnt have a hard drive..also which POrt is WAN when i install dd-wrt x86 on it??
if it doesnt have a harddrive it has something else which can be used. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
hello there all thanks again for the support..i wanted to know if i installed dd-wrt x86 on it..will i be able to use all the 3 mini PCI's as different AP's or running one CM9 at 2.4 GHz and the other at 5 Ghz or soemthing? will dd-wrt support it??
can i connect the output of the CM9 to an 2.4 ghz amp??
you dont need to install drivers . Its all in there. If any standard atheros card or your Ethernet cards are not detected then simply post the lspci output and BS will do the driver integration ASAP
according to the specs the pc is far more than good enough.
cm9 should be well supported by ddwrt as far as i know..so no problems with repeater and stuf