TP-LINK TL-WR1043ND hw rev. 1.8 and DD-WRT firmware

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7  Next
Author Message
balbesenok
DD-WRT User


Joined: 22 Jan 2011
Posts: 50

PostPosted: Sat Jan 22, 2011 12:33    Post subject: TP-LINK TL-WR1043ND hw rev. 1.8 and DD-WRT firmware Reply with quote
Hello, community,
Firstly, sorry for possible mistakes, English isn't mother tongue for me...
Secondly, I've a problem... I'm an owner of this device, my ISP provide internet-access via PPTP with Dual-Access. If i use a stock fw, I can get access to the internet, all base functions working correctly. but... I want connect to USB-jack a printer, not only sticks or HDD's. And I want try to use torrent-functional (Transmission f.eg.) Embarassed
Yesterday I tryed to install firmware, which named "TP-Link WR1043ND v1.1/v1.4 Firmware: Special image for initial flashing". Of course I was not sufficiently attentive, and missed hardware versions incompatibility (my device has 1.8 hw ver.).
As a result internet access was impossible, although firmware, I think, was installed, because web-interface was accessible, DHCP server "time-to-time" gives addresses to clients... Finally I came back to stock firmware. Sad
So, question: DD-WRT doesn't support my device, VPN PPTP with Dual Access or hardware revision isn't supported, incorrect firmware image selected or I do something wrong?
Thanks for your caution and waiting answers...
Sponsor
devil-strike
DD-WRT User


Joined: 18 Jun 2006
Posts: 87
Location: Netherlands

PostPosted: Sat Jan 22, 2011 17:53    Post subject: Re: TP-LINK TL-WR1043ND hw rev. 1.8 and DD-WRT firmware Reply with quote
balbesenok wrote:
Hello, community,
Firstly, sorry for possible mistakes, English isn't mother tongue for me...
Secondly, I've a problem... I'm an owner of this device, my ISP provide internet-access via PPTP with Dual-Access. If i use a stock fw, I can get access to the internet, all base functions working correctly. but... I want connect to USB-jack a printer, not only sticks or HDD's. And I want try to use torrent-functional (Transmission f.eg.) Embarassed
Yesterday I tryed to install firmware, which named "TP-Link WR1043ND v1.1/v1.4 Firmware: Special image for initial flashing". Of course I was not sufficiently attentive, and missed hardware versions incompatibility (my device has 1.8 hw ver.).
As a result internet access was impossible, although firmware, I think, was installed, because web-interface was accessible, DHCP server "time-to-time" gives addresses to clients... Finally I came back to stock firmware. Sad
So, question: DD-WRT doesn't support my device, VPN PPTP with Dual Access or hardware revision isn't supported, incorrect firmware image selected or I do something wrong?
Thanks for your caution and waiting answers...


Here on my 1043nd v1.8 is working perfect with dd-wrt, cannot test pptp bevause i dont hace that(cable dhcp)

_________________
WRT320N
Zyxel NBG-460N
Tp-Link WR-1043ND
Linksys E3200
balbesenok
DD-WRT User


Joined: 22 Jan 2011
Posts: 50

PostPosted: Sun Jan 23, 2011 15:08    Post subject: Re: TP-LINK TL-WR1043ND hw rev. 1.8 and DD-WRT firmware Reply with quote
Quote:
Here on my 1043nd v1.8 is working perfect with dd-wrt, cannot test pptp bevause i dont hace that(cable dhcp)


Hmmm... I installed DD-WRT again, but I can't congigure internet access, if I choose PPTP with static IP, i can't save settings. When I press APPLY button, field "default gateway" is empty Sad
ArionKrause
DD-WRT Novice


Joined: 08 Mar 2011
Posts: 3

PostPosted: Tue Mar 08, 2011 3:02    Post subject: Reply with quote
Just wanted to say that today I've bought a TP-Link TL-WR1043ND rev v1.8 and installed DD-WRT firmware on it successfully.
balbesenok
DD-WRT User


Joined: 22 Jan 2011
Posts: 50

PostPosted: Tue Mar 08, 2011 19:09    Post subject: Reply with quote
Thanks all, problem solved )))

Static IP + VPN-client + route to VPN-server throught static gateway = Dual Access PPTP VPN Smile
saadsaeed
DD-WRT Novice


Joined: 26 Sep 2010
Posts: 9

PostPosted: Wed Sep 21, 2011 18:41    Post subject: Reply with quote
Hey so which DDWRT version did you download for your 1.8 rev router?
Nitr0dux
DD-WRT Novice


Joined: 20 Sep 2011
Posts: 2

PostPosted: Thu Sep 22, 2011 19:49    Post subject: Reply with quote
saadsaeed wrote:
Hey so which DDWRT version did you download for your 1.8 rev router?


im trying to found out that aswell
pfuller88
DD-WRT Novice


Joined: 23 Aug 2011
Posts: 42

PostPosted: Sat Sep 24, 2011 1:32    Post subject: Build 17201 Reply with quote
Tplink and build 17201 works gear for me. Very Happy
nike_bytom
DD-WRT Novice


Joined: 13 Mar 2012
Posts: 1

PostPosted: Thu Aug 30, 2012 23:01    Post subject: Reply with quote
problem with WAN on v1.8
if u on dd-wrt install this first:
tl-wr1043nd_v1-webrevert.bin

after restart install this wr1043nv1_de_3_9_17_up_boot(100331).bin
(this is german firmware)

then ddwrt as normal
1.factory-to-ddwrt.bin
2.tl-wr1043nd-webflash.bin

http://dl.dropbox.com/u/11736714/TP-WR1043ND%20v1.8%20DD-WRT.zip
Armethyst
DD-WRT User


Joined: 03 Jun 2011
Posts: 64

PostPosted: Thu Aug 30, 2012 23:09    Post subject: Reply with quote
i upgraded from firmware 14929 to 19519, on 1043nd rev 1.8 and it all works great,
(i didn't use that method that was given here, just reset factory default and upgrade from web interface.

simple, clean, easy, works perfect.
mkhlzhr
DD-WRT Novice


Joined: 04 Aug 2012
Posts: 12

PostPosted: Tue Sep 04, 2012 6:10    Post subject: Reply with quote
I installed yesterday build 19519 on my TL-WR1043ND v1.8 and this morning I had to power off and on the router. It was hanging.

Somebody knows how to see how and when it hangs?
iZz0s
DD-WRT Novice


Joined: 13 Oct 2009
Posts: 19

PostPosted: Tue Sep 04, 2012 8:57    Post subject: Reply with quote
19519 hangs up every hour here on v1.8

now im on 18024, seems to work ^^
jleefw
DD-WRT Novice


Joined: 27 Mar 2012
Posts: 4

PostPosted: Thu Sep 06, 2012 6:00    Post subject: depending on which rev1.8 u have, this method does not work Reply with quote
Armethyst wrote:
i upgraded from firmware 14929 to 19519, on 1043nd rev 1.8 and it all works great,
(i didn't use that method that was given here, just reset factory default and upgrade from web interface.

simple, clean, easy, works perfect.


there are 2 versions of rev1.8 in the market.... those with SN beginning with 11xxxxx would work with any dd-wrt published firmwares.... but those SN beginning with 12xxxx will block the WAN port.

i've tried your method above, and it almost bricked my router (could not get an IP from the router via LAN interface, nor would a manually configured IP work, so I had to flash it when connecting to the router wirelessly)

I've tried reloading with the german firmware, and i must say that method works! though, a little too many steps....
Very Happy
swamisant
DD-WRT Novice


Joined: 19 Mar 2012
Posts: 1

PostPosted: Thu Sep 13, 2012 8:56    Post subject: Reply with quote
@nike_bytom After we install this german hack/. Can we install latest firmware update and it will work or it works with the provided version only.
benga
DD-WRT Novice


Joined: 20 Sep 2012
Posts: 1

PostPosted: Thu Sep 20, 2012 21:35    Post subject: Hi there Reply with quote
What about DD-WRT on TL-WR1043ND v1.9 ?
Is there a fw that's ok with this revision ?
Thanks.
Goto page 1, 2, 3, 4, 5, 6, 7  Next Display posts from previous:    Page 1 of 7
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum