Joined: 25 Mar 2008 Posts: 52 Location: Bedford, Ohio
Posted: Wed Mar 02, 2011 18:48 Post subject: Special Edition for E3000 / WRT610n
Hello all. Quick question here:
I am looking to implement the special edition for visitors to our office so I can throttle bandwidth. I am looking at getting an E3000 for this (yes overkill I know) but I was curious if the mega builds will work or do I need the 2.6 builds for this?
Also on that note, I do have a WRT610Nv1 and a WRT610Nv2 sitting around. I see that there is a mega_special_wrt610n.bin available. Is that for the v1 or the v2?
Maybe I can just use one of those instead of the E3000 since they are basically the same thing.
If someone could fill me in that would be great so I don't get any brickage.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Wed Mar 02, 2011 21:22 Post subject:
There is no K26 builds so the E3000 and the 610Nv2 are out...however, you could run the mega_special build on the 610Nv1 unit....the V1 has a 4705 processor where the 610Nv2 has a 4718 processor which isn't supported by the older V24 builds.
So...the 610Nv1 is your only option of what you've listed.
redhawk _________________ The only stupid question....is the unasked one.
Joined: 25 Mar 2008 Posts: 52 Location: Bedford, Ohio
Posted: Wed Mar 02, 2011 21:28 Post subject:
Thanks for the reply redhawk0.
I guess I will give the wrt610v1 a whirl and see what happens.
I think I saw a post saying that 2.6 was in alpha. Is there any talk of this progressing or should we stay away from routers that need 2.6 in the future if we are planning around the special builds?
Thanks again for the reply. I was worried I might not get one and end up in brick city _________________ WRT610Nv1 - WAN
WNR834Bv2 - Client Bridge
WL-520GU - Client Bridge
WRT54GSv7(x2) - Client Bridge
WRT54Gv2 - Client Bridge
WRT54Gv6 - Client Bridge
WRT54Gv8 - Client Bridge
WRT54Gv8.2 - Client Bridge
WLI-TX4-G54HP - Client Bridge