WZR-HP-G300NH support

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3 ... 50, 51, 52 ... 63, 64, 65  Next
View previous topic :: View next topic  
Author Message
macfive
DD-WRT Novice


Joined: 10 Oct 2007
Posts: 27
PostPosted: Fri Feb 25, 2011 6:18    Post subject: Reply with quote
Which builds are you running?
Back to top View user's profile Send private message
Sponsor
DaveTea
DD-WRT Novice


Joined: 11 Feb 2011
Posts: 17
PostPosted: Fri Feb 25, 2011 6:23    Post subject: Reply with quote
macfive wrote:
Which builds are you running?


16214
Back to top View user's profile Send private message
macfive
DD-WRT Novice


Joined: 10 Oct 2007
Posts: 27
PostPosted: Fri Feb 25, 2011 15:19    Post subject: Reply with quote
Are you running multiple routers in Client or Wireless Bridge configuration? Also know in the newer versions as WDS AP/WDS Station.
Back to top View user's profile Send private message
DaveTea
DD-WRT Novice


Joined: 11 Feb 2011
Posts: 17
PostPosted: Fri Feb 25, 2011 18:13    Post subject: Reply with quote
macfive wrote:
Are you running multiple routers in Client or Wireless Bridge configuration? Also know in the newer versions as WDS AP/WDS Station.


No, just a single unit.
Back to top View user's profile Send private message
Hacktivist
DD-WRT Novice


Joined: 07 May 2010
Posts: 2
PostPosted: Sat Feb 26, 2011 3:32    Post subject: Reply with quote
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.

Last edited by Hacktivist on Sat Feb 26, 2011 3:37; edited 1 time in total
Back to top View user's profile Send private message
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock
PostPosted: Sat Feb 26, 2011 3:35    Post subject: Reply with quote
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Awesome, but Txpower 14dBm? arg!
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
Back to top View user's profile Send private message Visit poster's website
yousaf465
DD-WRT User


Joined: 12 Sep 2010
Posts: 380
PostPosted: Sat Feb 26, 2011 4:21    Post subject: Reply with quote
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Please provide a download link.
_________________
Upgraded to
DD-WRT v24-sp2 (03/25/13) std -
build 21061

DD-WRT v24-sp2 (10/12/12) std
(SVN revision 20119)

TP-link 741ND
DD-WRT v24-sp2 (11/21/10) std
(SVN revision 15778)

Finding the correct MTU value for your ISP | BrainSlayer Vlan on Atheros
|

debrick Buffalo WZR-HP-G300NH
Back to top View user's profile Send private message Visit poster's website
Hacktivist
DD-WRT Novice


Joined: 07 May 2010
Posts: 2
PostPosted: Sat Feb 26, 2011 4:51    Post subject: Reply with quote
buddee wrote:
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Awesome, but Txpower 14dBm? arg!


The TX Power is currently set to 20 dBm. I tried changing it to 15dBm and 19dBm, but there was no increase from 14dBm.

yousaf465 wrote:
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Please provide a download link.


I'm sorry, but I'm not sure whether or not I'm allowed to do that.

Last edited by Hacktivist on Sun Feb 27, 2011 7:14; edited 1 time in total
Back to top View user's profile Send private message
yousaf465
DD-WRT User


Joined: 12 Sep 2010
Posts: 380
PostPosted: Sat Feb 26, 2011 5:09    Post subject: Reply with quote
Hacktivist wrote:
buddee wrote:
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Awesome, but Txpower 14dBm? arg!


The TX Power is currently set to 20 dBm. I tried changing it to 15dBm and 19dBm, but there was no increase from 14dBm.

yousaf465 wrote:
Hacktivist wrote:
Hello all,

I recently received an early build of the Buffalo Branded DD-WRT firmware which will be released shortly after the WZR-HP-AG300H goes on sale.

DD-WRT v24SP2-EU-US (02/23/11) std - build 16262

The wireless range has definitely gotten better. I'm not sure how stable this new build is, its too early to tell (my uptime is 14min).

I was hoping the 90day Client Lease Time on my ipod touch would be fixed and display at "Static", but its not a big deal.


Please provide a download link.


I'm sorry, but I'm not sure whether or not I'm allowed to do that.

However, you can do what I did: Send a request for this build to Brian Verenkoff. His email is brian(at)buffalotech.com


sent you a PM.
_________________
Upgraded to
DD-WRT v24-sp2 (03/25/13) std -
build 21061

DD-WRT v24-sp2 (10/12/12) std
(SVN revision 20119)

TP-link 741ND
DD-WRT v24-sp2 (11/21/10) std
(SVN revision 15778)

Finding the correct MTU value for your ISP | BrainSlayer Vlan on Atheros
|

debrick Buffalo WZR-HP-G300NH
Back to top View user's profile Send private message Visit poster's website
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock
PostPosted: Sat Feb 26, 2011 16:15    Post subject: Reply with quote
Yea but this unit is supposed to be able to do 28dBm according to smallnetbuilder anyhow, 14dBm is pretty far from 28dBm.

As it stands, my whr-hp-g54 has more range power than my wzr-hp-g300nh, which is not supposed to be. Hopefully this issue will be addressed soon.
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
Back to top View user's profile Send private message Visit poster's website
kyoshiroxtr
DD-WRT Novice


Joined: 13 Jul 2010
Posts: 1
PostPosted: Sat Feb 26, 2011 19:55    Post subject: Reply with quote
I have problems with my wireless connection whenever I have my external HDD connected to the USB port.
Sometimes it's SSID wont even get broadcasted, or even if it's broadcasted my devices wouldn't join.
The ext HDD is powered by an AC adapter, shouldn't have power issues.
Any advice?
Back to top View user's profile Send private message
yousaf465
DD-WRT User


Joined: 12 Sep 2010
Posts: 380
PostPosted: Sun Feb 27, 2011 8:15    Post subject: Reply with quote
buddee wrote:
Yea but this unit is supposed to be able to do 28dBm according to smallnetbuilder anyhow, 14dBm is pretty far from 28dBm.

As it stands, my whr-hp-g54 has more range power than my wzr-hp-g300nh, which is not supposed to be. Hopefully this issue will be addressed soon.




Max power in channel 11 is 27.42db http://www.mediafire.com/file/wrjf5hdmskk5txy/GetApplicationAttachmen1t.pdf
_________________
Upgraded to
DD-WRT v24-sp2 (03/25/13) std -
build 21061

DD-WRT v24-sp2 (10/12/12) std
(SVN revision 20119)

TP-link 741ND
DD-WRT v24-sp2 (11/21/10) std
(SVN revision 15778)

Finding the correct MTU value for your ISP | BrainSlayer Vlan on Atheros
|

debrick Buffalo WZR-HP-G300NH
Back to top View user's profile Send private message Visit poster's website
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock
PostPosted: Sun Feb 27, 2011 11:10    Post subject: Reply with quote
yousaf465 wrote:
buddee wrote:
Yea but this unit is supposed to be able to do 28dBm according to smallnetbuilder anyhow, 14dBm is pretty far from 28dBm.

As it stands, my whr-hp-g54 has more range power than my wzr-hp-g300nh, which is not supposed to be. Hopefully this issue will be addressed soon.




Max power in channel 11 is 27.42db http://www.mediafire.com/file/wrjf5hdmskk5txy/GetApplicationAttachmen1t.pdf


yousaf465, Did you even go to smallnetbuilder to validate the info?

http://www.smallnetbuilder.com/wireless/wireless-reviews/30889-buffalo-nfiniti-wireless-n-high-power-router-a-access-point-reviewed?start=1
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.

Last edited by buddee on Sun Feb 27, 2011 12:22; edited 1 time in total
Back to top View user's profile Send private message Visit poster's website
dmsmitty76
DD-WRT Novice


Joined: 26 Aug 2006
Posts: 42
PostPosted: Sun Feb 27, 2011 11:11    Post subject: Reply with quote
yousaf465 wrote:
buddee wrote:
Yea but this unit is supposed to be able to do 28dBm according to smallnetbuilder anyhow, 14dBm is pretty far from 28dBm.

As it stands, my whr-hp-g54 has more range power than my wzr-hp-g300nh, which is not supposed to be. Hopefully this issue will be addressed soon.




Max power in channel 11 is 27.42db http://www.mediafire.com/file/wrjf5hdmskk5txy/GetApplicationAttachmen1t.pdf


I know you can set the power output on the router with a setting. How do you test power output, is there a Windows App that lets you test the actual TX/RX power out?
Back to top View user's profile Send private message
alexatkinuk
DD-WRT User


Joined: 07 Dec 2010
Posts: 131
Location: Sheffield, UK
PostPosted: Sun Feb 27, 2011 18:00    Post subject: Reply with quote
dmsmitty76 wrote:
yousaf465 wrote:
buddee wrote:
Yea but this unit is supposed to be able to do 28dBm according to smallnetbuilder anyhow, 14dBm is pretty far from 28dBm.

As it stands, my whr-hp-g54 has more range power than my wzr-hp-g300nh, which is not supposed to be. Hopefully this issue will be addressed soon.




Max power in channel 11 is 27.42db http://www.mediafire.com/file/wrjf5hdmskk5txy/GetApplicationAttachmen1t.pdf


I know you can set the power output on the router with a setting. How do you test power output, is there a Windows App that lets you test the actual TX/RX power out?


I would expect it to be more complicated than that as testing the power at a normal client would not account for losses in transmission or gains at the clients antenna.
_________________
2xWZR-HP-G300NH(B) (B0 B0) DD-WRT v24-sp2 (06/14/11) std 17201
One antenna swapped for an RP-SMA connector and 14dB external Yagi.
http://csdprojects.co.uk/ddwrt/
Back to top View user's profile Send private message
Goto page Previous  1, 2, 3 ... 50, 51, 52 ... 63, 64, 65  Next Display posts from previous:    Page 51 of 65
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum