Posted: Fri Dec 17, 2010 12:00 Post subject: Strange things happend when updating FW.
Testing updating of software to my ASUS RT-N16, using 15778-mega.
I have found som strange behavior when updating, bug/my fult don't know.
I'm trying to explain what have hapend:
When I update or change build, there is som strange issue happend.
First I take backup, nvram and wan traffic, only using to same build.
Then I do a factory resett before update FW.
Upload new FW and after update router do factory resett again,
klicking in from web-gui.
Wan-kabel and my lan-kabel to my computer are connected.
If I uploading my backed up FW to router which went well
and I have wan-ip number BUT I don't get any internet to
my lan-computer. Can se wan-ip on control panel on dd-wrt.
Okey retting to facktory default and doing all by hand
then all funcktioning went well untill I doing REBOT ROUTER
Then I have no internet to my lan-computer. Can se wan-ip
on control panel on dd-wrt.
I have tessted this with no luck:
wanf=`nvram get wan_iface`
iptables -I INPUT 2 -i $wanf -p udp --sport 67 --dport 68 -j ACCEPT
and this iptables -I INPUT -p udp --dport 68 -j ACCEPT
And more strange is if I look in Upnp side I can find others folks
ip and application running, mostly torrent but some spotify.
All this is realy strange and do you folks have same behavior/problem ?
Can someone test this PLEASE !
Don't hesitate to ask me question in case I have forgotten something.
Se picture for more info.
strange_2.jpg
Description:
Filesize:
68.8 KB
Viewed:
5586 Time(s)
uppstart.jpg
Description:
Filesize:
37.91 KB
Viewed:
5586 Time(s)
_________________ [I prefer answere in whole sentence]
Last edited by kt_haddock on Sat Dec 18, 2010 14:01; edited 1 time in total
Posted: Fri Dec 17, 2010 15:11 Post subject: Re: Strange things happend when updating FW.
barryware wrote:
kt_haddock wrote:
Pied Piper wrote:
kt_haddock wrote:
If I uploading my backed up FW to router
This is a very bad thing to do when you have changed builds.
First I take backup, nvram and wan traffic, only using to same build.
Restoring your backup, is also restoring the problems..
Start with a fresh config by hand and see if that resolves your issues.
Yepp I have tested that, It goes ok until I REBOT ROUTER then I can't get WAN access. I have updated/tested ~50 builds this year but this occur latley, can't say howe many builds back.
Can someone test this on your router to confirm this behavior, PLEASE _________________ [I prefer answere in whole sentence]