Posted: Mon Nov 15, 2010 2:14 Post subject: jDownloader or another program for DDWRT?
Just wondering if there was a way to port jDownloader, or another download manager to be used on DDWRT?
I currently already have Transmission installed on my router (E3000) and wanted to be able to download files from the internet (using my Megaupload/Rapidshare accounts) directly to the drive connected to my router (without using my computer).
Any way to do this with jDownloader or an alternative application?
How about the standard wget command? _________________ Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
I'm not using the router itself nor do I use rapidshare. You can test this....
You probably need my optware install to have decent bash support...
You will at least need to replace the 1st line
Code:
#!/bin/bash
Code:
#!/opt/bin/bash
If I have some spare time I can have a look if I can incorporate it as a standard script... _________________ Asus RT16N + OTRW
Kingston 4GB USB-disk 128 MB swap + 1.4GB ext3 on /opt + 2 GB ext3 on /mnt
Copperjet 1616 modem in ZipB-config
Asterisk, pixelserv & Pound running on router
Another Asus RT16N as WDS-bridge
myrapbook - 0.1b-1 - A daemon originally written for WD My Book World disk drives, that implements a downloader for rapidshare.com premium users. _________________ Asus RT16N + OTRW
Kingston 4GB USB-disk 128 MB swap + 1.4GB ext3 on /opt + 2 GB ext3 on /mnt
Copperjet 1616 modem in ZipB-config
Asterisk, pixelserv & Pound running on router
Another Asus RT16N as WDS-bridge
Posted: Tue Feb 15, 2011 8:34 Post subject: pyload not working
I followed the guide linked to in the last post. Installed all the dependencies as required. However, I am not being able to install pyqt4 which is required for the GUI to work. Any ideas or pointers to get this to work?
Alternatively, is there any other software which will work with optware on dd-wrt for http downloads? The thing is that I have a seedbox and I need to download files from the seedbox to my local drive. Currently, i have configured the box to allow http downloads over port 80. I have configured it to ask for a password to allow access. I am currently using my main system to download these files using Internet Download Manager. I want to move this specific task to the dd-wrt router. I am not comfortable with cli and thus need a gui interface to add tasks to the system.
py25-crypto - 2.1.0-2 - Python Cryptography Toolkit.
py25-curl - 7.19.0-1 - PycURL is a Python interface to libcurl.
py25-django - 1.1.2-1 - A high-level Python Web framework that encourages rapid development and clean, pragmatic design.
py25-mercurial - 1.7.1-1 -
py25-openssl - 0.10-1 - Python wrapper around a small subset of the OpenSSL library.
py25-pil - 1.1.7-1 - The Python Imaging Library (PIL) adds image processing capabilities to your Python interpreter.
python - 2.5-1 - This is a package that sets up the default python.
python25 - 2.5.5-2 - Python is an interpreted, interactive, object-oriented programming language.
These are phyton packages list which I have installed on my router... I don't see any pyqt4... _________________
Asus WL-500gP v2 DD-WRT v24-sp2 (04/07/12) big (SVN revision 18946M NEWD Eko)
In that case, can you please post what exactly you did?
I followed the following. I have an Asus RT-N16:
1. Router flashed with the appropriate dd-wrt
2. Installed optware using Frater's guide
3. Checked that everything is working
4. Followed the link you posted and installed pyload using the link for Asus Routers.
When I check the installation, it shows an error about the GUI not working due to the missing pyqt4.
I would really appreciate if you can help me with this.
Thanks a ton. I am in my office now. Will have access to the router in about 6 hours. Will give it a shot then. Please check here again when you can to see if it worked or not. Thanks once again.
One more question. How do you access the GUI for pyload?
Thanks a ton. I am in my office now. Will have access to the router in about 6 hours. Will give it a shot then. Please check here again when you can to see if it worked or not. Thanks once again.
One more question. How do you access the GUI for pyload?
Remember that we will be using WEB INTERFACE, not "pyLoadGui.py", we allways use pyLoadCore.py after configure it for use it with internal web server and web interface.
To access to web interface is the way you comment, and the password and username I think you'll be asked when configuring pyload.
As I said, that's what I rememeber that I did. I want to update my Asus router with the last dd-wrt, so maybe I'll do a guide from the scratch. _________________
Asus WL-500gP v2 DD-WRT v24-sp2 (04/07/12) big (SVN revision 18946M NEWD Eko)