K26 Build Supported Router List

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... , 19, 20, 21  Next
Author Message
s.safarov
DD-WRT Novice


Joined: 04 Mar 2010
Posts: 41

PostPosted: Sun Sep 26, 2010 7:02    Post subject: Reply with quote
I has built firmware image for Asus WL-500gP v2.
Firmware image probably also works with Asus WL-520GU, Asus WL-500W.

Firmware image is attached to post.



dd-wrt.v24-K26.bin
 Description:
Firmware image for Asus WL-500gP v2

Download
 Filename:  dd-wrt.v24-K26.bin
 Filesize:  3.75 MB
 Downloaded:  1714 Time(s)



Last edited by s.safarov on Tue Oct 12, 2010 8:07; edited 1 time in total
Sponsor
hapahopi
DD-WRT Novice


Joined: 07 Nov 2008
Posts: 12

PostPosted: Thu Sep 30, 2010 0:20    Post subject: Reply with quote
does this one have 3G/UMTS option for WAN?
s.safarov
DD-WRT Novice


Joined: 04 Mar 2010
Posts: 41

PostPosted: Thu Sep 30, 2010 5:45    Post subject: Reply with quote
hapahopi wrote:
does this one have 3G/UMTS option for WAN?

Firmware image has build from default configuration with some changes to enable booting 2.6 kernel. May be I has disabled support for USB modems.
AndreyPopov
DD-WRT User


Joined: 15 May 2008
Posts: 431

PostPosted: Sat Oct 09, 2010 16:37    Post subject: Reply with quote
s.safarov wrote:
I has built firmware image for Asus WL-500gP v2.
Firmware image probably also works with Asus WL-520GU, Asus WL-500W, D-Link DIR-320.

Firmware image is attached to post.


I try on my Asus WL520-GU - router boot, but:
- wifi led not light
- and PPPoE ssession NOT start
s.safarov
DD-WRT Novice


Joined: 04 Mar 2010
Posts: 41

PostPosted: Sun Oct 10, 2010 13:18    Post subject: Reply with quote
AndreyPopov wrote:
I try on my Asus WL520-GU - router boot, but:
- wifi led not light
- and PPPoE ssession NOT start


On my router WiFi led also not light
In ".config" file exist following option

PPPOE_SUPPORT=1
CONFIG_PPPOE=y
Mordak
DD-WRT Guru


Joined: 27 Dec 2007
Posts: 932
Location: Orange, MA

PostPosted: Sat Oct 30, 2010 21:12    Post subject: Reply with quote
Has anyone running WRT54G-TM's noticed the newer K26 build don't seem to work any more? I tried to upgrade from eko svn14205 K26 BIG which ran great for many months to the most recent eko svn15508 mini BIG and any other I could think to try it just failed and I got a constant ttl=100 while pinging. Web upgrade and tftp both fail with these newer builds. Any one have any thoughts? Confused
_________________

6 X WRT54G-TM
1 X WRT54G V1.0
1 X WRT54G V2.2
1 X WRT54G V5.0
2 X WRT54GS V1.0
2 X WRT54GS V1.1
1 X WRT54GS V2.0
1 X WRT160NL v1.0
1 X WRT320N
2 X WRT350N
1 X WRT600N v1.0
2 X WRT610N v1.0
1 X E1500
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Sat Oct 30, 2010 21:32    Post subject: Reply with quote
Mordak wrote:
Has anyone running WRT54G-TM's noticed the newer K26 build don't seem to work any more? I tried to upgrade from eko svn14205 K26 BIG which ran great for many months to the most recent eko svn15508 mini BIG and any other I could think to try it just failed and I got a constant ttl=100 while pinging. Web upgrade and tftp both fail with these newer builds. Any one have any thoughts? Confused


No thoughts butt Razz where you been be'yatch Smile

My TM is my spare that I put into service when the RT is on the bench.. I only run std_nokiad builds (k24) on the TM. It has an SD mod and runs optware (otrw) and mypage.

How come you run K26 on your TM? Not an insult or anything.. K24 runs faster than K26 on the older "legacy" routers (240 mhz or under processors)

Running K26 on a "slower" router is like running vista on a machine designed for win98.

My opinion... (based on testing)

Good to see you on the forum again..

EDIT: I guess that was a thought. Confused

_________________
[Moderator Deleted] Shocked
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Sat Oct 30, 2010 23:47    Post subject: Reply with quote
The k2.6 kernel source were updated recently and support for some hardware is no longer in the new sources. I don't know if that's the reason it's no longer working on your TM but it is why BCM4704 CPU's are no longer supported by k2.6.
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
Mordak
DD-WRT Guru


Joined: 27 Dec 2007
Posts: 932
Location: Orange, MA

PostPosted: Sun Oct 31, 2010 20:01    Post subject: Reply with quote
barryware wrote:
Mordak wrote:
Has anyone running WRT54G-TM's noticed the newer K26 build don't seem to work any more? I tried to upgrade from eko svn14205 K26 BIG which ran great for many months to the most recent eko svn15508 mini BIG and any other I could think to try it just failed and I got a constant ttl=100 while pinging. Web upgrade and tftp both fail with these newer builds. Any one have any thoughts? Confused


No thoughts butt Razz where you been be'yatch Smile

My TM is my spare that I put into service when the RT is on the bench.. I only run std_nokiad builds (k24) on the TM. It has an SD mod and runs optware (otrw) and mypage.

How come you run K26 on your TM? Not an insult or anything.. K24 runs faster than K26 on the older "legacy" routers (240 mhz or under processors)

Running K26 on a "slower" router is like running vista on a machine designed for win98.

My opinion... (based on testing)

Good to see you on the forum again..

EDIT: I guess that was a thought. Confused
Hey Barryware, good to be back around too. I don't know why I just started running it when Eko released a version that would work on the TM's. I'll go back to the 2.4 Kernel builds I guess.

phuzi0n that makes sense to me I'm sure that must be the reason. Thanks for the info. The TM's have a BCM5352 chipset BTW.

_________________

6 X WRT54G-TM
1 X WRT54G V1.0
1 X WRT54G V2.2
1 X WRT54G V5.0
2 X WRT54GS V1.0
2 X WRT54GS V1.1
1 X WRT54GS V2.0
1 X WRT160NL v1.0
1 X WRT320N
2 X WRT350N
1 X WRT600N v1.0
2 X WRT610N v1.0
1 X E1500
SoulRaven
DD-WRT Novice


Joined: 23 Nov 2009
Posts: 32
Location: Campulung Muscel

PostPosted: Wed Dec 29, 2010 7:19    Post subject: Reply with quote
is it posibile for Asus WL-500g Premium V1? 8Mb
kingsmill
DD-WRT User


Joined: 20 May 2008
Posts: 79

PostPosted: Wed Dec 29, 2010 7:54    Post subject: Reply with quote
s.safarov wrote:
I has built firmware image for Asus WL-500gP v2.
Firmware image probably also works with Asus WL-520GU, Asus WL-500W.


Is this a one off build or have these changes been added to the baseline. As such, do the latest v24-k26 builds from eko and bs support the WL-500GPv2 routers?

Thanks,
Geoff..


Last edited by kingsmill on Wed Dec 29, 2010 8:38; edited 1 time in total
0sAND1s
DD-WRT Novice


Joined: 19 Jan 2010
Posts: 26
Location: Bucharest, Romania

PostPosted: Wed Dec 29, 2010 8:02    Post subject: K2.6 Asus WL500gP v1 Reply with quote
SoulRaven wrote:
is it posibile for Asus WL-500g Premium V1? 8Mb


Hi,

Please read the previous posts, where I describe the problems I had upgrading to K2.6, here:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=63757&postdays=0&postorder=asc&start=225 .

For short, it works, but there are many problems: requires boot-loader upgrading, wireless has problems, it's slower, etc. It doesn't worth it. NTFS r/w is now possible on K2.4 too, so I'll stick with K2.4.

_________________
ASUS WL500g Premium V1, CFE 3.91.7.0;
DD-WRT v24-sp2 (08/12/10) mega (SVN revision 14929); Optware, the right way
s.safarov
DD-WRT Novice


Joined: 04 Mar 2010
Posts: 41

PostPosted: Thu Dec 30, 2010 8:07    Post subject: Reply with quote
kingsmill wrote:
Is this a one off build or have these changes been added to the baseline. As such, do the latest v24-k26 builds from eko and bs support the WL-500GPv2 routers?

Thanks,
Geoff..

I has added ticket 1849 with information about to run kernel 2.6 on WL-500gP v2. You may test patches attached to ticket.

Because ticket not closed, probability in not added to baseline.
steveaustin316
DD-WRT Novice


Joined: 01 Jun 2008
Posts: 28

PostPosted: Wed May 04, 2011 15:45    Post subject: Reply with quote
is a posibility for WNR834bv2?



it will be good for this router get the next level.....
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Wed May 04, 2011 16:28    Post subject: Reply with quote
Old devices are no longer supported by k2.6 builds. Devices now use either k2.4 only (old hardware) or k2.6 only (new hardware).
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
Goto page Previous  1, 2, 3 ... , 19, 20, 21  Next Display posts from previous:    Page 20 of 21
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum