Posted: Sat Sep 18, 2010 18:55 Post subject: WRT610N Samba/USB HDD problem.
I am trying to install HDsamba, and the installation fails at Task 4, producing this log:
Quote:
HDsamba2 v5.60
Start Installation Log
---------------------------------------------------------
Sat Sep 18 14:49:06 UTC 2010
Detected valid time server !
Detected JFFS !
Detected adequate JFFS space !
Detected USB Storage Device !
SAFEMOUNT: No disc can be found with GUID , exiting
Task 3 looks like this:
Quote:
TASK 2: Done
---------------------------------------------------------
.
---------------------------------------------------------
TASK 3: Confirming presence of at least one USB Drive
VERIFIED: USB Storage Device Detected....
Now you have to choose where you opt partition, you swap partition
an you data partition is located.
Please enter partition id for opt:
29B2DD24-697D-C843-8397-8E455BAFF8A7
Please enter partition id for swap:
D16BF1D2-3356-F148-AFD0-A8EBD1681807
Please enter partition id for data:
A8E1538E-6784-774C-8217-8FFD4F824C35
Please enter partition id for opt:
29B2DD24-697D-C843-8397-8E455BAFF8A7
Please enter partition id for swap:
D16BF1D2-3356-F148-AFD0-A8EBD1681807
Please enter partition id for data:
A8E1538E-6784-774C-8217-8FFD4F824C35
Please enter partition id for opt:
29B2DD24-697D-C843-8397-8E455BAFF8A7
Please enter partition id for swap:
D16BF1D2-3356-F148-AFD0-A8EBD1681807
Please enter partition id for data:
A8E1538E-6784-774C-8217-8FFD4F824C35
TASK 3: Done
---------------------------------------------------------
.
---------------------------------------------------------
TASK 4: So now let's mount the devices for the first time.
First check weather the mountpoints are free.
Mountpoints are free
Something went wrong during device mount, see the log for details.
In order to enter the partition ids, I had to plug the drive into my laptop and use a disk utility to find the GUID of each partition.
Is that normal?
When I gave up on HDsamba, and tried installing slim samba, the automount feature fails to mount my drive, producing this log:
Quote:
--- /dev/discs/disc0/disc
Block device, size 1.819 TiB (2000396746752 bytes)
DOS/MBR partition map
Partition 1: 1.819 TiB (2000396746240 bytes, 3907024895 sectors from 1)
Type 0xEE (EFI GPT protective)
GPT partition map, 128 entries
Disk size 1.819 TiB (2000396746752 bytes, 3907024896 sectors)
Disk GUID 837F70D7-E5B2-4B4D-B469-2038F074E95A
Partition 1: 953.7 MiB (999982592 bytes, 1953091 sectors from 34)
Type Basic Data (GUID A2A0D0EB-E5B9-3344-87C0-68B6B72699C7)
Partition Name ""
Partition GUID 29B2DD24-697D-C843-8397-8E455BAFF8A7
Ext3 file system
Volume name "opt"
UUID 72A80547-E1FB-481F-B68B-CE67DE9EE5AA (DCE, v4)
Volume size 953.7 MiB (999981056 bytes, 244136 blocks of 4 KiB)
Partition 2: 238.4 MiB (249999872 bytes, 488281 sectors from 1953125)
Type Linux Swap (GUID 6DFD5706-ABA4-C443-84E5-0933C84B4F4F)
Partition Name ""
Partition GUID D16BF1D2-3356-F148-AFD0-A8EBD1681807
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 238.4 MiB (249991168 bytes, 61033 pages of 4 KiB)
Partition 3: 1.818 TiB (1999146729984 bytes, 3904583457 sectors from 2441406)
Type Basic Data (GUID A2A0D0EB-E5B9-3344-87C0-68B6B72699C7)
Partition Name ""
Partition GUID A8E1538E-6784-774C-8217-8FFD4F824C35
Ext3 file system
Volume name "data"
UUID 496B75A2-A24C-4E54-9CBF-F62853579768 (DCE, v4)
Volume size 1.818 TiB (1999146729472 bytes, 488072932 blocks of 4 KiB)
Partition 4: unused
Status: Not mounted
Joined: 24 Aug 2009 Posts: 2070 Location: South Florida
Posted: Sat Sep 18, 2010 22:03 Post subject:
PaulP wrote:
autobot wrote:
Samba is in the new build...check this link: dd-wrt.com/phpBB2/viewtopic.php?t=79150
The new version of ntfs-3g not correctly working. And Samba 3.5.5-1 works very slow.
I observe transfer only 2,8 Mb/s.
You must be doing something wrong then!
Samba.png
Description:
Filesize:
78.96 KB
Viewed:
17110 Time(s)
_________________ Optware, the Right Way
Asus RT-AC68U
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Engenious ECB350
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ205W
SonicWall TZ105W
Waiting for BS's builds, hope Samba will be included in the atheros builds also. _________________ ▲ ACTIVE ▲
[Broadcom ARM64] ASUS RT-AC86U v? --802.11ac wave 2-- RT-AC86U Thread | ASUSWRT-Merlin 384.18-Kernel-4.1.27
Have you tried inserting the fuse module? Is the module in /usr/lib/modules (may be /lib/modules/<kernel version>)...not around my router right now. _________________ Eko Builds
Have you tried inserting the fuse module? Is the module in /usr/lib/modules (may be /lib/modules/<kernel version>)...not around my router right now.
Yes, the fuse.ko in /opt/lib/modules/2.6.24.111
But no more files in this folder except fuse.ko. It is strange.
I try to insert fuse, but get an error:
root@DD-WRT:~# cd /opt/lib/modules/2.6.24.111
root@DD-WRT:/opt/lib/modules/2.6.24.111# insmod fuse.ko
insmod: cannot insert 'fuse.ko': Success
Also I try to install new ntfs-3g module with integrated fuse, but get errors: