This key are valid for our Senao NOP8670,Avila Gateworks,X86,Compex WP188,Pronghorn SBC,Ovislink/Airlive,Accton,Wistron, Ubiquiti LS2,LS5,NS2,NS5,PS2 and PS5 DD-WRT distributions too please contact us at info@dd-wrt.com for getting more informations about our volume licensing program
Actually my product is "[8403402] DD-WRT V24 Special for Broadcom based devices", NOT the "[8403420] DD-WRT Professional Activation", so actually I was wrong and there was no activation needed, but I can't find the extra options on the firmware I downloaded from the announcements in this forum.
Quote:
DD-WRT V24 Special
Our special DD-WRT standard/micro distribution which an additional PPPOE-Relay (standard only), Per User Bandwith Control and Zero IP Hotspot.
I can't find those options, and especially the "Per User Bandwith Control" what I need the most.
So, sorry again for asking, but the firmware version I'm using (Firmware: DD-WRT v24-sp2 (06/27/10) std-special); does it need an activation or not? If it does need an activation, as I wrote earlier, I am not finding anything in all the Web GUI tabs and menus, there is no "activation" button/tab/option for me.
If this firmware version DOES NOT need an activation, could you, please, direct me to the appropriate menu/option/tab where I can find those extra options mentioned on the product page here
You guys are awesome, thanks again so much and sorry for the trouble![/url]
You don't need any activation for that. Bandwidth control is on NAT/QoS, QoS tab. You should be able to enter the Netmask or MAC and set the speed limits.
You don't need any activation for that. Bandwidth control is on NAT/QoS, QoS tab. You should be able to enter the Netmask or MAC and set the speed limits.
Thank you very much shizou. That really helped a lot :)