WRT54g v1.1 help need to get ports back to normal

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
chippy
DD-WRT Novice


Joined: 04 Mar 2009
Posts: 4

PostPosted: Sun Jul 18, 2010 13:59    Post subject: WRT54g v1.1 help need to get ports back to normal Reply with quote
Hi guys i brought a wrt54g v1.1 in the hope of urning it in to a dual wan with a guide i found but it didnt go to plan. so i put original firmware back on but the ports are the wrong way round because when i did the mod i had to run the scripts to chnge ports.
Any way of getting these ports back to normal ?
Sponsor
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Sun Jul 18, 2010 20:32    Post subject: Reply with quote
Hard reset it to clean its configuration.
_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum