Has anybody posted instructions on how to setup a WNDR3300 with DDWRT v-24-sp2 std-nokaid-nohot-nostore with a WNDR3700 using the latest stock firmware? I am trying to setup a 5Ghz network between my livingroom with the XBOX360,TV, PS3, WII to my WNDR3700 in another room connected to a Cable Modem.
I had setup this kinda link with a Linksys and a Buffalo 54G before but there are more options here.
I already re-read the Router Repeater section and tried that and the WNDR3300 shows the WDS Nodes at the bottom but it won't pull up anything else when running a site-survey. On WL0 I set the Mode to Repeater Bridge, the Wireless Network Name is the same, I used WEP 128 with the same password. WL0 WDS has the first Wireles MAC set to LAN with the MAC of the WDR3700 in it also. WDS Subent is set to Disabled.
If I could see some screen shots of other setups I can figure it out from there.
Joined: 24 Aug 2009 Posts: 2070 Location: South Florida
Posted: Wed Jul 14, 2010 18:19 Post subject:
Trying to WDS a Broadcom device and an Atheros device is difficult. I believe there is a Sticky in the Atheros forum with more information. _________________ Optware, the Right Way
Asus RT-AC68U
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Engenious ECB350
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ205W
SonicWall TZ105W
Repeating bridge mode works for me, right now I have the secondary WDNR3300 connected to a primary WDNR3700. I wouldn't recommend WDS, I have always found it problematic. Make sure if you want to use the WDNR3300 in 5G mode, you have to set it to NA-Mixed or N-Only (5G).
Note: Site Survey does not work with NA-Mixed _________________ DD-WRT 24-sp2
Current:
Linksys wrt610n v2
Netgear wndr3300
Airlink101 AR690W
Linksys WRT-350N
Linksys WRT54g v8
Past routers
Netgear WPN834bV2
Airlink101 AR670W
Linksys WRE54g