Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sat Jun 12, 2010 18:42 Post subject:
testing response helps improving features and fixing bugs _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Posted: Sat Jun 12, 2010 19:06 Post subject: wrt160nl
There are 3 problems with wrt160nl.
1.The SES / AOSS / EZ-SETUP / WPS led is orange is not blue even when the connection is made.
I correct this with this commands:
Code:
nvram set connblue=1
nvram commit
reboot
2.The wireless light is blinking even there is no wireless client, it should blinking just when someone is connecting.
3.IP Filter Settings (adjust these for P2P)Maximum Ports is 4096 and default it says that is 32768. _________________ R7800-OWNER
Last edited by gogubeb on Sat Jun 12, 2010 19:16; edited 4 times in total
Joined: 13 Nov 2009 Posts: 247 Location: Morehead,Kentucky
Posted: Sat Jun 12, 2010 19:27 Post subject:
On the WRT400N when you apply settings you lose your connection, the only I have found to get an ip address is to reboot my cable modem.
Still loosing wireless connection on the 5Ghz band, also very low power. _________________ Linksys E3000
DD-WRT v24-sp2 (12/19/10) big
(SVN revision 15943M NEWD-2 K2.6 Eko)
Joined: 31 Aug 2009 Posts: 2448 Location: Third Rock from the Sun
Posted: Sat Jun 12, 2010 19:28 Post subject:
Linksys WRT400N
Wireless LED flashes constantly
Security LED doesn't come on when security is set
Mac address' still incorrect. _________________ Peacock Thread-FAQ -- dd-wrt Wiki
Wireless transmit power on the wrt400n seriously messed up.
Its low to begin with but changing wireless channels on either 2.4 or 5ghz greatly affects the other.
To the point where you can have 45% at 15-20 feet to nothing with just one change.
Presently the power issue seems to be the biggest problem for the atheros chipset.
Speeds vary but with some channel messing around you can get what one would expect.
Example:
both wirless canada/n only.
Turbo
Changing the wireless on the 5ghz once from say 161 to 153 channel (lower) can increase or decrease channel from 40% to 10%.
Odd behavior to say the least.
Wrt400n
Last edited by Pharaoh on Sun Jun 13, 2010 13:37; edited 1 time in total
Dark_Shadow, I think I just didn't restart the router after configuring it (or I did but it got really messed up, can't remember now. I did erase nvram as it's faster than 30/30/30 method :)