1200bps DD-WRT Novice Joined: 31 May 2010 Posts: 3
Posted: Mon May 31, 2010 5:36 Post subject: Printing on TP-LINK TL-WR1043ND
I've installed build 14280. Unlike other router models, there is only Std available for the TP-link router (currently running DD-WRT v24-sp2 (04/15/10) std).
I've been trying to get printing to work on this router. I've been following the instructions for printing on Asus:
I've also tried following instructions for the general printing on wiki pages.
If I run:
dmesg | grep usb
it sees the printer:
<6>usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10BC
ls -la /dev/usb/
Doesn't show any printers as recognized.
Did anyone get printing to work on this router?
Amaterasu DD-WRT Novice Joined: 28 May 2010 Posts: 3
Posted: Mon Jul 19, 2010 11:07 Post subject:
Did you have a solution? I also have the 1043...
hirnschraube DD-WRT Novice Joined: 13 Aug 2010 Posts: 1
massayoshi DD-WRT Novice Joined: 14 Oct 2010 Posts: 1
Posted: Thu Oct 14, 2010 5:56 Post subject:
can anyone else confirm if this works?
dabongolo DD-WRT Novice Joined: 11 Oct 2010 Posts: 3
Posted: Thu Oct 14, 2010 9:36 Post subject: Re: Printing on TP-LINK TL-WR1043ND
With my 1043ND and an older Kyocera-printer I got printing to work with theese instructions. Works very well.
mutantbunny DD-WRT Novice Joined: 05 Oct 2010 Posts: 1 Location: São Paulo, Brazil
Posted: Thu Oct 14, 2010 20:16 Post subject:
I followed these instructions and got it working with an Epson Stylus Office T33, using the build indicated on router database (14896, if i recall correctly):
I wanted to use memory swapping, and that buid did not support it, so I upgraded to a newer build. After the upgrade, storage and printing stopped working, because the kernel modules for USB storage are missing in the newer builds.
corvinis DD-WRT Novice Joined: 04 Nov 2010 Posts: 1
Posted: Thu Nov 04, 2010 10:46 Post subject:
Hi. I was able to print from the printer attached to the router (hp f2480) but it takes a long time since giving the order to print to actually the printer start printing. Can somebody help me?