Dlink dir320 Bluetooth dongles

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods
Author Message
J0eB1ex
DD-WRT Novice


Joined: 12 Oct 2009
Posts: 1

PostPosted: Mon Oct 12, 2009 16:30    Post subject: Dlink dir320 Bluetooth dongles Reply with quote
After working hard I managed to install and run a bluetooth dongle using bluez on my dir320 router (dd-wrt v24 sp2 usb).
However, my main goal was to use multiple dongles on my router (using a hub). this cause some problems...
the hub works just fine and I can still use one dongle but when I try to initialize the other one using hciconfig hci1 up
it throws a timeout error:
@DD-WRT:/tmp/root# hciconfig hci0 up
Can't init device hci0: Connection timed out (145)

here some info that might help:
lsmod output:
@DD-WRT:/tmp/root# lsmod
Module Size Used by
sco 10196 0 (unused)
rfcomm 35104 0 (unused)
l2cap 18348 1 [rfcomm]
hci_usb 10544 1
bluez 36416 2 [sco rfcomm l2cap hci_usb]
etherip 5104 0 (unused)
ip_nat_pptp 2560 0 (unused)
ip_conntrack_pptp 3036 1
ip_nat_proto_gre 1664 0 (unused)
ip_conntrack_proto_gre 2584 0 [ip_nat_pptp ip_conntrack_pptp]
jffs2 97848 1
ext3 76932 2
jbd 58280 2 [ext3]
usb-storage 40344 2
sd_mod 13092 4
scsi_mod 101488 2 [usb-storage sd_mod]
usb-ohci 20352 0 (unused)
usbcore 84576 0 [hci_usb usb-storage usb-ohci]
switch-robo 5356 0 (unused)
switch-core 6352 0 [switch-robo]

and the hci config -a output:
@DD-WRT:/tmp/root# hciconfig -a
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1
DOWN
RX bytes:41020750 acl:0 sco:804303 events:13 errors:0
TX bytes:44 acl:0 sco:0 commands:13 errors:0
Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT

hci1: Type: USB
BD Address: 00:19:86:00:2B:48 ACL MTU: 1017:8 SCO MTU: 64:1
UP RUNNING
RX bytes:71 acl:0 sco:0 events:7 errors:0
TX bytes:26 acl:0 sco:0 commands:7 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'BCM2045B'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Ver: 2.0 (0x3) HCI Rev: 0x0 LMP Ver: 2.0 (0x3) LMP Subver: 0x2303
Manufacturer: Broadcom Corporation (15)
Sponsor
samiya
DD-WRT Novice


Joined: 28 Jan 2010
Posts: 1

PostPosted: Mon Feb 01, 2010 5:18    Post subject: bluetooth Reply with quote
Are bluetooth headphones safe to use during flights? I’m in the process of buying new headphones. Are bluetooth headphones safe to use during flights? Won’t it interfere with the plane’s equipment?
__________________________
market samurai ~ marketsamurai ~ marketsamurai.com
drbios
DD-WRT Novice


Joined: 06 Jul 2008
Posts: 21

PostPosted: Tue May 11, 2010 21:19    Post subject: Re: Dlink dir320 Bluetooth dongles Reply with quote
how do you get a bluetooth works?

J0eB1ex wrote:
After working hard I managed to install and run a bluetooth dongle using bluez on my dir320 router (dd-wrt v24 sp2 usb).
However, my main goal was to use multiple dongles on my router (using a hub). this cause some problems...
the hub works just fine and I can still use one dongle but when I try to initialize the other one using hciconfig hci1 up
it throws a timeout error:
@DD-WRT:/tmp/root# hciconfig hci0 up
Can't init device hci0: Connection timed out (145)

here some info that might help:
lsmod output:
@DD-WRT:/tmp/root# lsmod
Module Size Used by
sco 10196 0 (unused)
rfcomm 35104 0 (unused)
l2cap 18348 1 [rfcomm]
hci_usb 10544 1
bluez 36416 2 [sco rfcomm l2cap hci_usb]
etherip 5104 0 (unused)
ip_nat_pptp 2560 0 (unused)
ip_conntrack_pptp 3036 1
ip_nat_proto_gre 1664 0 (unused)
ip_conntrack_proto_gre 2584 0 [ip_nat_pptp ip_conntrack_pptp]
jffs2 97848 1
ext3 76932 2
jbd 58280 2 [ext3]
usb-storage 40344 2
sd_mod 13092 4
scsi_mod 101488 2 [usb-storage sd_mod]
usb-ohci 20352 0 (unused)
usbcore 84576 0 [hci_usb usb-storage usb-ohci]
switch-robo 5356 0 (unused)
switch-core 6352 0 [switch-robo]

and the hci config -a output:
@DD-WRT:/tmp/root# hciconfig -a
hci0: Type: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 672:3 SCO MTU: 48:1
DOWN
RX bytes:41020750 acl:0 sco:804303 events:13 errors:0
TX bytes:44 acl:0 sco:0 commands:13 errors:0
Features: 0xff 0x3e 0x85 0x38 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT

hci1: Type: USB
BD Address: 00:19:86:00:2B:48 ACL MTU: 1017:8 SCO MTU: 64:1
UP RUNNING
RX bytes:71 acl:0 sco:0 events:7 errors:0
TX bytes:26 acl:0 sco:0 commands:7 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy:
Link mode: SLAVE ACCEPT
Name: 'BCM2045B'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Ver: 2.0 (0x3) HCI Rev: 0x0 LMP Ver: 2.0 (0x3) LMP Subver: 0x2303
Manufacturer: Broadcom Corporation (15)
chloechen
DD-WRT Novice


Joined: 12 May 2010
Posts: 1

PostPosted: Wed May 12, 2010 9:02    Post subject: Re: bluetooth Reply with quote
samiya wrote:
Are bluetooth headphone safe to use during flights? I’m in the process of buying new headphones. Are bluetooth headphones safe to use during flights? Won’t it interfere with the plane’s equipment?

Any device that transmits or receives a signal, is never allowed once the door of the aircraft is closed at departure. Once the aircraft has landed at it's destination, and on taxi to your gate, use of your bluetooth headphone is then permitted.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum