Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Tue Feb 23, 2010 12:47 Post subject:
I've had the V24 nokiad running on my HP-G54 for about an hour...no problems so far.
I'm not going to try the K26 on it again though. Too many problems yesterday recovering it. (I am on the road so I am limited in my "debricking" hardware right now.)
Upgraded 2 WNDR 3300 AP/RP From V24 BS mini 13832 > 13968> 13972. Stable, good file transfer, steaming. I wish I knew what the difference is between the builds.
Upgraded 2 WNDR 3300 AP/RP From V24 BS mini 13832 > 13968> 13972. Stable, good file transfer, steaming. I wish I knew what the difference is between the builds.
I searched the forums and trac... maybe I missed an announcement somewhere. Why is BS not including the Netgear WNDR3300 trailed chk files in his last three K24 builds? The last known working one was for r13637.
Joined: 01 May 2009 Posts: 274 Location: San Jose, Ca
Posted: Tue Feb 23, 2010 18:53 Post subject:
patord wrote:
I searched the forums and trac... maybe I missed an announcement somewhere. Why is BS not including the Netgear WNDR3300 trailed chk files in his last three K24 builds? The last known working one was for r13637.
i was wondering the same thing.... _________________ E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
Joined: 24 Aug 2009 Posts: 2070 Location: South Florida
Posted: Tue Feb 23, 2010 19:15 Post subject:
Running smooth here on main Asus N16 AP... _________________ Optware, the Right Way
Asus RT-AC68U
Asus RT-N66U
Asus RT-N10
Asus RT-N12
Asus RT-N16 x5
Asus WL520gU
Engenious ECB350
Linksys WRT600Nv1.1
Linksys WRT610Nv1
Linksys E2000
Netgear WNDR3300
SonicWall NSA220W
SonicWall TZ215W
SonicWall TZ205W
SonicWall TZ105W
Put this build on my WRT610Nv2. Did 30/30/30 before and after. Re-did all my router settings (argh, this is already getting old) and then it refused to boot. Did another 30/30/30. Re-did my settings. Reboot. Seemed to take 10 minutes until I was able to access the admin website or SSH, though this is not the case after a 30/30/30.
I have a USB drive connected, using Optware, using 2.4GHz band for 802.11 B/G, 5GHz band for N-only, both using WPA2 personal + AES.
Other than that it seems to be running fine. Uptime is around 24hrs now. The
message from dmesg has seemed to have gone away. Using partition #2 of USB disk for swap (128MB). Build 13832, I had numerous swapper failure messages. _________________ Linksys WRT610N v2 (DD-WRT) :: D-LINK DIR-825 (OpenWrt) :: The World in 35mm :: Bandwidth Shaping with DD-WRT
Joined: 01 May 2009 Posts: 274 Location: San Jose, Ca
Posted: Tue Feb 23, 2010 21:34 Post subject:
my 610N V2 doesn't want to boot up at time but all i do is just turn off the power on it for 15 sec then turn back on and all is fine _________________ E3000 K2.6 Eko 16758 Mega
E3000 CB K2.6 EKO 16758 STD USB NAS
WRT610N V2 CB K2.6 Eko15337 STD Nokaid
WRT310N V2 CB K2.6 BS 15362 STD Nokaid
Joined: 26 Nov 2008 Posts: 700 Location: Toronto, Canada
Posted: Tue Feb 23, 2010 22:37 Post subject: All is good except for 5GHz radio
This build seems good with the exception of 5GHz radio, but the 5GHz issue has been ongoing since somewhere after 13309 (when the new wireless modes were added, this started).
Basically, router to router on 5GHz, same build, they cannot talk with each other if I use N only; if I select 'mixed', once I power cycle, cannot change channels (reminds me of old WRT600N days where it was stuck on either channel 36 or 54).
There are a lot of bugs; I could go into more detail but I won't if the end result will be the same as every other time. More details can be found in TRAC here:
http://svn.dd-wrt.com:8000/dd-wrt/ticket/1405
This can be reproduced very easily...it was easy to nail down having 2 610Nv2 made things alot easier.
In short, WDS mode can work, until you power cycle..then all is lost!
I knew it had something to do with the way DDWRT was initializing the 5GHz radio...now I know this for sure...its not a cursed router..or 2 or 3 or 5 of them...its cursed buggy code! _________________
Hardware that works for me:
RT-N66U MerlinWRT 3.0.0.4.374.33_beta3b
E3000 WDS Kong v21661
Loaded this one on my WRT310N and expierienced slow internet speeds and erratic connections.
I adjusted some things like power and channel but could not get the speeds I had with 13968 so I reverted back to 13968. All is well again on this previous build.
)
