Linksys WRT54GL Help

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
MikeCross
DD-WRT Novice


Joined: 17 Feb 2010
Posts: 2

PostPosted: Thu Feb 18, 2010 0:03    Post subject: Linksys WRT54GL Help Reply with quote
I am running the following

Router: Linksys WRT54GL
Firmware: DD-WRT v24-sp2

Problem: I have to split my bandwidth with another person and they are plugged into Lan port 1 on my Linksys. I need to limit that port to a certain speed so it doesn't take away from the rest of my network. I was told this could be done with DD-WRT Firmware but the user didn't remember how they did it. Please help


Thanks in advance,

Mike
Sponsor
nebnostod
DD-WRT Novice


Joined: 18 Feb 2010
Posts: 1

PostPosted: Thu Feb 18, 2010 1:52    Post subject: Nat/QoS -> QoS -> Ethernet Port Priority Reply with quote
I was just passing through and saw your post. I believe what you are looking for is under the NAT/QoS menu tab. Next go to the QoS section and at the bottom there is the option to limit each physical port's bandwidth. I hope that helps.
MikeCross
DD-WRT Novice


Joined: 17 Feb 2010
Posts: 2

PostPosted: Thu Feb 18, 2010 2:17    Post subject: Reply with quote
Yes that is correct but I need to limit the upload and download if possible. I attached a Screen shot of the QoS screen and I do think it is located here but I have no idea how to get it work without screwing something else up. Thanks a lot


Mike



qos.PNG
 Description:
 Filesize:  60.02 KB
 Viewed:  6184 Time(s)

qos.PNG


Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum