easy...seems that the mlppp protocoll needs additional 50byte overhead (im guessing thats its öess then that but 50 bytes is aave for operation) _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
after looking at the forums it looks like if your router is not vintage only and it supports newd or newd2 it may work but it is up to us to test and report if we need mlppp we got to test and report.
I tried dd-wrt.v24_nokaid_generic.bin on my wrt54g v2.2 and no matter what I tried the "Multi link" checkbox refuses to stay checked. I check it, "apply changes" but when the screen refreshes it isn't checked. dd-wrt.v24-13856_NEWD_std-nokaid.bin worked just fine. Any ideas?
As an aside, when I used dd-wrt.v24-13856_NEWD_std-nokaid.bin I noticed a 10% packet loss with "Multi link" enabled, zero with it disabled. Any ideas why SLPPP would lead to packet loss? Is this a bug in the firmware?
ok got 3 routers a wrt54gl a wrt54gs v2 and wrt54gs v5
on the wrt54gs v5, the macro build will will install but the check mark will not stay on. i still got to read more as the other builds will not install.
on the wrt54gs v2 same for micro built but no other testing done for now.
will continue testing on all routers.
I'm getting a asus16n soon will test there to.
Posted: Thu Feb 18, 2010 3:31 Post subject: Multi Link Unchecked
Sash wrote:
reset to defaults
Appreciate the micro build. Tried it on my WRT54G v5, but as some other users are reporting, the Multi Link checkbox does not stay checked after applying the settings. I followed the following procedure twice:
1. 30/30/30 reset, wait 5 minutes after reboot
2. Upload new firmware using Firmware Upgrade admin page, wait 5 minutes after reboot
3. 30/30/30 reset, wait 5 minutes after reboot
Before I could do step 2 I was forced to reset the default password to get to the Firmware Upgrade page. I don't know if that's an issue. When I change other settings (MTU, PPPoE, etc.) they do "stick."