install DD-WRT (v24sp2 v13525 20091228) On WZR-HP-G300NH

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
View previous topic :: View next topic  
Author Message
SomeGuyInOz
DD-WRT Novice


Joined: 30 Jan 2008
Posts: 11
PostPosted: Thu Feb 04, 2010 11:30    Post subject: Unable to find the firmware Reply with quote
Quote:
I can confirm that the firmwares here: http://www.dd-wrt.com/site/support/other-downloads?path=others/eko/BrainSlayer-V24-preSP2/12-28-09-r13525/buffalo_wzrg300nh/ work on the buffalo wzr-hp-g300nh

The firmware is not there... I followed that link but there is no firmware there. Anyone else have any luck?
Back to top View user's profile Send private message
Sponsor
Luyi
DD-WRT Novice


Joined: 04 Feb 2010
Posts: 13
PostPosted: Thu Feb 04, 2010 11:49    Post subject: Reply with quote
I have followed ERamseth's instruction to flashing my Buffalo. But it isn't work.
I always got "timeout" from TFTP.
Have any easy way to do this?
Back to top View user's profile Send private message
MHOOO
DD-WRT Novice


Joined: 04 Mar 2009
Posts: 12
PostPosted: Thu Feb 04, 2010 12:28    Post subject: Re: Unable to find the firmware Reply with quote
SomeGuyInOz wrote:
Quote:
I can confirm that the firmwares here: http://www.dd-wrt.com/site/support/other-downloads?path=others/eko/BrainSlayer-V24-preSP2/12-28-09-r13525/buffalo_wzrg300nh/ work on the buffalo wzr-hp-g300nh

The firmware is not there... I followed that link but there is no firmware there. Anyone else have any luck?

I successfully flashed my WZR-HP-G300NH using revision 13832.
However, the router does not get an IP in Client Mode and the SSID of VAPs is empty for some reason.
Back to top View user's profile Send private message
ERamseth
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 34
PostPosted: Thu Feb 04, 2010 17:53    Post subject: Re: Unable to find the firmware Reply with quote
MHOOO wrote:
SomeGuyInOz wrote:
Quote:
I can confirm that the firmwares here: http://www.dd-wrt.com/site/support/other-downloads?path=others/eko/BrainSlayer-V24-preSP2/12-28-09-r13525/buffalo_wzrg300nh/ work on the buffalo wzr-hp-g300nh

The firmware is not there... I followed that link but there is no firmware there. Anyone else have any luck?

I successfully flashed my WZR-HP-G300NH using revision 13832.
However, the router does not get an IP in Client Mode and the SSID of VAPs is empty for some reason.


I havent tried client mode. AP works OK for me.
Back to top View user's profile Send private message
ERamseth
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 34
PostPosted: Thu Feb 04, 2010 17:53    Post subject: Reply with quote
Luyi wrote:
I have followed ERamseth's instruction to flashing my Buffalo. But it isn't work.
I always got "timeout" from TFTP.
Have any easy way to do this?



are you on linux?
Back to top View user's profile Send private message
mindugo
DD-WRT Novice


Joined: 04 Feb 2010
Posts: 15
PostPosted: Thu Feb 04, 2010 18:24    Post subject: Reply with quote
ERamseth, could you check if any kind of USB support is available?
Back to top View user's profile Send private message
ERamseth
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 34
PostPosted: Thu Feb 04, 2010 18:48    Post subject: Re: Unable to find the firmware Reply with quote
SomeGuyInOz wrote:
Quote:
I can confirm that the firmwares here: http://www.dd-wrt.com/site/support/other-downloads?path=others/eko/BrainSlayer-V24-preSP2/12-28-09-r13525/buffalo_wzrg300nh/ work on the buffalo wzr-hp-g300nh

The firmware is not there... I followed that link but there is no firmware there. Anyone else have any luck?


i posted the wrong link. try this: http://www.dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F02-03-10-r13832%2Fbuffalo_wzrg300nh%2F
Back to top View user's profile Send private message
ERamseth
DD-WRT Novice


Joined: 06 Jan 2010
Posts: 34
PostPosted: Thu Feb 04, 2010 18:49    Post subject: Reply with quote
mindugo wrote:
ERamseth, could you check if any kind of USB support is available?


will do this afternoon.

Also, note to all... I have updated my earlier post with more detail. the link is here: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=403971#403971
Back to top View user's profile Send private message
chalkos
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 41
PostPosted: Thu Feb 04, 2010 23:37    Post subject: Reply with quote
Luyi wrote:
I have followed ERamseth's instruction to flashing my Buffalo. But it isn't work.
I always got "timeout" from TFTP.
Have any easy way to do this?


I've just finnished this wiki page:
http://www.dd-wrt.com/wiki/index.php/Buffalo_WZR-HP-G300NH

I followed it myself to flash my buff and it worked. Also added some details and changed some commands.
Back to top View user's profile Send private message
SomeGuyInOz
DD-WRT Novice


Joined: 30 Jan 2008
Posts: 11
PostPosted: Fri Feb 05, 2010 1:20    Post subject: Re: Unable to find the firmware Reply with quote
ERamseth wrote:
SomeGuyInOz wrote:
Quote:
I can confirm that the firmwares here: http://www.dd-wrt.com/site/support/other-downloads?path=others/eko/BrainSlayer-V24-preSP2/12-28-09-r13525/buffalo_wzrg300nh/ work on the buffalo wzr-hp-g300nh

The firmware is not there... I followed that link but there is no firmware there. Anyone else have any luck?


i posted the wrong link. try this: http://www.dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F02-03-10-r13832%2Fbuffalo_wzrg300nh%2F

Thanks for the link. That one is correct. I'll give it a go flashing my router as soon as I get the chance and I'll report back here when I can.

I've only ever flashed Broadcom-based routers before, so this will be something new for me. Do you know if this firmware is just a standard dd-wrt or a mega? I'm currently using the VoIP version on another router (it has the Milkfish SIP router built-in). I'm hoping that the WZR-HP-G300NH will support mega builds, due to its large amount of ram, etc...
Back to top View user's profile Send private message
Slax
DD-WRT User


Joined: 10 Nov 2009
Posts: 50
PostPosted: Fri Feb 05, 2010 3:53    Post subject: Reply with quote
Perfect. Just one question, is it stable enough for daily use or at least better than stock firmware?
Back to top View user's profile Send private message
Luyi
DD-WRT Novice


Joined: 04 Feb 2010
Posts: 13
PostPosted: Fri Feb 05, 2010 9:38    Post subject: Reply with quote
I try again on Linux. Now it is work.
But Ipkg is still have trouble on my router.
I can't execute "Ipkg update".
So i can't use Ipkg to install ipk from internet.
Back to top View user's profile Send private message
psyphah
DD-WRT Novice


Joined: 05 Feb 2010
Posts: 27
PostPosted: Fri Feb 05, 2010 13:56    Post subject: Most frustrating... Reply with quote
Hi.

(Experienced user and firmware upgrader speaking, just to get that out of the way...)

I've followed the dd-wrt installation instructions to the letter.

Model is WZR-HP-G300NH, and it's the Japanese model (I live in Japan).

The tftp transfer completes with no errors.

However, after the tftp transfer, it's just booting up into the stock buffalo japanese language firmware - it seems that it might be rejecting the dd-wrt tftp image and seeing that I have no console to check I am unsure why this should be.

Anyone have an idea how I can persuade this bloomin' thing to take the dd-wrt image?
Back to top View user's profile Send private message
yaiba
DD-WRT Novice


Joined: 21 Dec 2009
Posts: 13
PostPosted: Fri Feb 05, 2010 16:51    Post subject: Re: Most frustrating... Reply with quote
psyphah wrote:
Hi.

(Experienced user and firmware upgrader speaking, just to get that out of the way...)

I've followed the dd-wrt installation instructions to the letter.

Model is WZR-HP-G300NH, and it's the Japanese model (I live in Japan).

The tftp transfer completes with no errors.

However, after the tftp transfer, it's just booting up into the stock buffalo japanese language firmware - it seems that it might be rejecting the dd-wrt tftp image and seeing that I have no console to check I am unsure why this should be.

Anyone have an idea how I can persuade this bloomin' thing to take the dd-wrt image?


me too, with WZR-HP-G300NH firmware Japanese, i try both on ubuntu & winxp, the tftp transfer is ok but nothing happen Sad , it boot up stock firmware. Sad
Back to top View user's profile Send private message
chalkos
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 41
PostPosted: Fri Feb 05, 2010 19:19    Post subject: Reply with quote
Slax wrote:
Perfect. Just one question, is it stable enough for daily use or at least better than stock firmware?


Yes. Actually I never expected it to be so stable, but it is really stable and it is also (way) better than stock firmware.

Flashed yesterday and had no problems until now.
Every "daily use" feature I use is working which is great.
Back to top View user's profile Send private message
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 3 of 8
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum