Posted: Thu Jan 14, 2010 16:15 Post subject: No option to activate JFFS in web-gui
Hi,
im new to dd-wrt, i changed from openWrt. I have a Linksys WRT54GL1.1 router with sd mod and DD-WRT v24-sp2 (10/10/09) std - build 13064. I activeted the SD mod in the web-gui and then i searched for the section to turn jffs on (like described in the wiki), but the is none.
Is this on purpose? How can i turn it on? should i change to another firmware version?
Oh thanks for that info, i only read the wrong information on wikipedia.
So if i take dd-wrt.v24_usb_generic.bin or dd-wrt.v24_nokaid_generic.bin it should work? can i simply upgrade via web-gui or do i have to do the 30/30/30-hard resets as described in peakock tread?
Okay, i installed now DD-WRT v24-sp2 (07/22/09) std-nokaid - build 12548M NEWD Eko like i should (with hard resets of cause).
Now when i enable the MMC support via web interface and press save it recognizes the card correctly. But when i restart the router i get this:
Total / Free Size
2,688.00 KB / 0
With the version i postet in the first post it just worked fine. I tried another sd-card but it didn't work. Sonetimes when i change the MMC setting the router reboots itself. Any idea?
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu Jan 14, 2010 19:16 Post subject:
Try the nokaid build from BS 13525. I seem to recall that there was a change made for the mmc/sd card mods....but I don't use it myself, so I may not have all the facts.
Give it a try first...let us know.
redhawk _________________ The only stupid question....is the unasked one.
Read the JFFS wiki page about how to properly enable+clean it. If you want the new SDHC then you'll need a newer build like redhawk said.
http://www.dd-wrt.com/wiki/index.php/Jffs#Directions_for_.28normal.29_users:_using_Web-GUI_Interface _________________ Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
Last edited by phuzi0n on Thu Jan 14, 2010 19:20; edited 1 time in total
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Thu Jan 14, 2010 19:19 Post subject:
rabon wrote:
Okay, i installed now DD-WRT v24-sp2 (07/22/09) std-nokaid - build 12548M NEWD Eko like i should (with hard resets of cause).
Now when i enable the MMC support via web interface and press save it recognizes the card correctly. But when i restart the router i get this:
Total / Free Size
2,688.00 KB / 0
With the version i postet in the first post it just worked fine. I tried another sd-card but it didn't work. Sonetimes when i change the MMC setting the router reboots itself. Any idea?
manually define the gpio. Don't use auto and preformat the card to ext2~3 _________________ [Moderator Deleted]
this worked. If i follow now the instructions in the wiki for the jffs2 i get other errors
firstly i execute these commands:
mkdir /mmc/jffs
mount --bind /mmc/jffs /jffs
with v24 enable JFFS2 support (tab: Administration -> tab: Management -> section: JFFS2 Support).
Then it looks good but after a few minutes it shows the following in the administratin tab:
(in jffs2 support)
Total / Free Size
192.00 KB / 0
