Joined: 16 Jun 2006
Location: Berlin, Germany
|Posted: Thu Dec 24, 2009 21:24 Post subject: infos zu NEWD2
|Quelle und weitere Infos hier
[WARNING] - Unless you know how to debrick a router...do NOT attempt to load any NEWD2 builds on an untested unit....YOU have been warned. (again)
BRICK at your own risk...JTAG (or Serial) will be needed to recover if it won't work.
Added info....to avoid confusion regarding what is what here.
NEWD = Kernel K2.4.37 and wl driver = 22.214.171.124
NEWD2 = Kernel K2.4.37 and wl driver = 126.96.36.199
You can view this using "wl ver" command...and "uname -a" command.
Note: All Broadcom k2.6 builds use the NEWD2 driver. k2.4 NEWD2 support does not mean that your model can run k2.6 builds and is another topic. Some hardware versions that only run k2.6 builds are listed here to prevent confusion with previous versions of the hardware.
first...this is NOT the thread for discussing NEWD vs NEWD2 issues....all questions in this thread will be deleted (and any responses to those questions also). If you want to know more about VINT, NEWD and NEWD2 firmware...please search the forum...there have been many posts regarding the various wireless drivers.
This thread is for providing a list of known routers that will work with the NEWD2 driver and which routers won't.
If you can confirm will or won't please post here...I'll try to keep this top post up-to-date.
Note about Micro builds.
There seems to be some confusion about the Micro build of NEWD2. Micro builds were intended for the neutered routers only...Micro can run on some other models, however, it's not advised.
Never load any Micro build on a router with a Gigabit switch like the WRT310N router (including NEWD). You will Brick it....the micro build does not have the drivers required for the Gigabit switch and will cause an endless reboot loop if loaded.
Confirmed models that WILL work with NEWD2:
Asus WL-500GP v2
Belkin F5D7231 v2000
Linksys WAP54G v3.1 (the v3.0 is not tested - redhawk)
Linksys WRT54G v5, v6
Linksys WRT54GS v5 (no afterburner-page4)
Linksys WRT54GS v6 (afterburner working - page4)
Linksys WRT150N v1, v1.1
Linksys WRT160N v1, v1.1
Linksys WRT160N v3 - with special K26 NEWD2 build only.
Linksys WRT300N v1.1 only
Linksys WRT310N v1
Linksys WRT600N v1, v1.1
Linksys WRT610N v1 (the build with 610n in the name is NEWD2)
Linksys WRT610N v2 - with special K26 NEWD2 build only.
Netgear WNDR3300N v1
Confirmed models that will NOT work with NEWD2:
Asus WL-500GP (v1)
Linksys WAP54G v1, v2
Linksys WRT54G V1 through V4
Linksys WRT54G v8, v8.1, v8.2
Linksys WRT54G2 v1
Linksys WRT54GS v1 through v4, v7.2
Linksys WRT54GL v1, v1.1
Linksys WRTSL54GS v1
Linksys WRT160N v2
Linksys WRT300N v1
Netgear WNR834b v1, v2
US Robotics USR5461