Web Interface Goes Down

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware
Goto page 1, 2  Next
Author Message
lazerusrm
DD-WRT User


Joined: 22 Sep 2006
Posts: 107

PostPosted: Tue Nov 07, 2006 17:35    Post subject: Web Interface Goes Down Reply with quote
How do i restart the web interface?

The router is still working just perfectly, but the web interface is non functional after a few hours of routing :)

i can ssh, telnet, ping, etc. just fine. so from a command line, how do i restart the web server?

thanks Smile
Sponsor
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7025
Location: Dresden, Germany

PostPosted: Tue Nov 07, 2006 18:27    Post subject: Reply with quote
startservice httpd. but consider that the http webserver restarts itself automaticly. so something else is wrong at your place. maybe you disabled the webserver
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
lazerusrm
DD-WRT User


Joined: 22 Sep 2006
Posts: 107

PostPosted: Tue Nov 07, 2006 19:22    Post subject: Reply with quote
it only happens after lots of traffic goes through the router. the router keeps working, just httpd stops working.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7025
Location: Dresden, Germany

PostPosted: Tue Nov 07, 2006 21:09    Post subject: Reply with quote
maybe you just have a problem to connect to the router by network. the httpd has nothing todo with traffic and if ps shows still the process httpd, everything should be fine. maybe i should try to investigate if there is any bad issue with realtek adapters (beside the already known ones Smile)
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
lazerusrm
DD-WRT User


Joined: 22 Sep 2006
Posts: 107

PostPosted: Wed Nov 08, 2006 0:26    Post subject: Reply with quote
i think the bug is fixed in the 11-7-06 version, we will see though
lexridge
DD-WRT User


Joined: 07 Jun 2006
Posts: 300

PostPosted: Wed Nov 08, 2006 7:55    Post subject: Reply with quote
I have a strange problem with a brand new machine I just built tonight while at work.

It's an AMD Sempron 2800 system with 128MB RAM, on a MSI MicroATX MB. There are three Linksys gigabit ethernet cards filling all 3 slots, plus the MB ethernet as well (nvidia). All non essential hardware is turned off in bios (floppy, SATA, Audio, etc).

All the NICs are recognized. I can connect to the web interface just fine, but it does not take any changes. One pages reports a disconnect, others just sit on a white screen. I cannot even upload a backed up config file from a test unit (same versions of DD-WRT). The httpd never crashes, and I can still access the main menus after this, but any changes I make do not take. and sends me to a white screen. It is running the 11-07-2006 version.

Could this be a HDD issue? Perhaps it is (for some reason) not writable, and freaks out the process. I'm tempted to try the 11-04-2005 without jffs filesystem. Somehow, I think the problem may go away.
lazerusrm
DD-WRT User


Joined: 22 Sep 2006
Posts: 107

PostPosted: Wed Nov 08, 2006 8:12    Post subject: Reply with quote
i had a similar problem once, i think i ended up rebooting, and re-installing the firmware and it worked itself out.

sometimes i have strange problems that fix themselves on a reboot Smile
Like the udhcpc not working, for example.

But, however, its' been up and running for 14 hours so far, and no problems. Average WAN speeds of about 5 megabits bidirectional...
lexridge
DD-WRT User


Joined: 07 Jun 2006
Posts: 300

PostPosted: Wed Nov 08, 2006 16:45    Post subject: Reply with quote
I wish I could say the same. I have rebooted and re-'flashed' several times. I'm gonna try a different HDD sometime today. I wish I could find locally a CF/IDE adapter. Guess I'll have to mail order one.
RobbieL811
DD-WRT Novice


Joined: 03 Aug 2014
Posts: 5

PostPosted: Fri Dec 01, 2017 22:21    Post subject: Re: Web Interface Goes Down Reply with quote
lazerusrm wrote:
How do i restart the web interface?

The router is still working just perfectly, but the web interface is non functional after a few hours of routing Smile

i can ssh, telnet, ping, etc. just fine. so from a command line, how do i restart the web server?

thanks Smile


Hey bud. I seem to be having this exact same issue on the latest build. I'm running a WRT3200ACM. I do a ton of file transferring, and like you stated, after doing a lot, my router webui goes down. EVERYTHING else is working as far as I can see. Did you ever figure anything out on this?
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5765
Location: Romerike, Norway

PostPosted: Fri Dec 01, 2017 22:55    Post subject: Reply with quote
The WRT3200ACM is not a X86 unit, so you cannot use the same FW.

Post in the Marvell Forum for this unit.
RobbieL811
DD-WRT Novice


Joined: 03 Aug 2014
Posts: 5

PostPosted: Fri Dec 01, 2017 23:14    Post subject: Reply with quote
Per Yngve Berg wrote:
The WRT3200ACM is not a X86 unit, so you cannot use the same FW.

Post in the Marvell Forum for this unit.


Well, I'm not using the exact same firmware obviously. I just figured it may be a general issue with DD-WRT. His issue sounds extremely similar to mine.
phatbob
DD-WRT User


Joined: 03 Jan 2017
Posts: 211

PostPosted: Wed Feb 19, 2020 4:26    Post subject: Reply with quote
I do have a similar problem. After several clicks the webgui will freeze. I am running the most recent version of x86-64, r42410. It's running on a relic I threw together today from old parts layin around.

Quad core @ 2.8
Gigabyte motherboard
8gb ddr2
tp-link gigabit nic

It's running on a usb stick, and is actually working flawlessly so far. I have openvpn set up and that is working, connection is great. Only problem is that webgui. For instance I just logged in and wanted to backup the settings so that's like 2 clicks to get to the page and it froze when I clicked the backup button. Sometimes it lasts longer. The router is still working fine though, in fact I'm connected to it as I post.

This is by no means my final build, hardware wise, so I'm wondering if this is a common issue? I'm wondering if I should go back to an earlier build, and if so how far back, since most of the hardware is like 12 years old. Also, if I manage to backup my settings before rolling back build, will the restore work on the older build for settings, or will it change the build?

One last thing that I thought was a bit weird, but maybe it's not considering my knowledge of this stuff, anyway the "router" recognizes the PCI nic as the wan and the onboard nic as the lan.

Thanx Du
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7189
Location: Texas, USA

PostPosted: Wed Feb 19, 2020 4:41    Post subject: Reply with quote
Not sure if DD is like OpenWRT, pfSense, OPNSense, etc. where you can change which NIC is which interface or not, but that may be an option. It's trivial in an x86* environment. Everyone seems to be having issues, no matter the hardware and I am not. I just do not understand why or what configuration item is breaking things, BUT there have been some changes for the next release that may fix these issues. Or not.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
phatbob
DD-WRT User


Joined: 03 Jan 2017
Posts: 211

PostPosted: Thu Feb 20, 2020 18:37    Post subject: Reply with quote
Not really concerned about which nic is which, as long as it works. Just thought it was weird. I have more or less skirted around the webgui issue by bookmarking the tabs I use the most to reduce clicks and just exit quickly.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1478

PostPosted: Thu Feb 20, 2020 20:22    Post subject: Reply with quote
r42460 is out today with many changes to channel selection, httpd, webif and samba. lol this thread goes back to 2006.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum