Diod you do a proper hard reset on the router? Are you running torrents? _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
I did a hard reset on the router and also offed all my torrents before trying to reproduce the problem, which usually reproduces it very well on its own.
Sounds like interference from another router nearby. Try scanning channels and then picking a different channel. _________________ 2 node (v23 sp2) WDS network over WPA2/AES comprising 2x Buffalo WHR-G54S's.
Depending on how far away you are from the router. You can manually set the router to 54Mbps. Some users have done this and have had great success with it on the G2's. _________________ R7000 Kong vpn 23550-R01 (Main Router)
WRT610Nv2 converted E3000 vpnKong 21661 (RB)
WRT600N v1.1 BS std-nokaid 13637(5Ghz CB)(2.4Ghz AP)
WRT54G v5 BS micro 14684(RB)
Put your Ack Timing to 0 and make sure your Max Ports is 4096 with TCP/UDP Timeouts to 90. I can't think of anything else to tell you at the moment. Just make sure your router is not next to any metals, and you never said how close you are to your router? _________________ R7000 Kong vpn 23550-R01 (Main Router)
WRT610Nv2 converted E3000 vpnKong 21661 (RB)
WRT600N v1.1 BS std-nokaid 13637(5Ghz CB)(2.4Ghz AP)
WRT54G v5 BS micro 14684(RB)
I will try out lowering the TX and see how it goes.
Another question I would like to ask is that currently I am using Eko Build 12548M Micro, in the case that the tx power does not work, is there a possibility that the brainslayer Build might solve this problem?
If yes, can I just use the Web Gui Firmware upgrade to switch over to the brainslayer version?
I have my WRT54G2 (v1) on 28mW (i do that on all my routers out of habit), i use Ack timing of 0 on everything, and the only time i see rates drop like that is due to interference. A wifi scan shows there are quite a few networks nearby to me, i had the same problem of the router showing 2meg so changed the channel as the wifi scan indeed showed quite a few neighbours on that same channel. Did that and problem solved. _________________ 2 node (v23 sp2) WDS network over WPA2/AES comprising 2x Buffalo WHR-G54S's.
I actually meant 28mw first of all. What do you have your router transmitting, Mixed or G-only? _________________ R7000 Kong vpn 23550-R01 (Main Router)
WRT610Nv2 converted E3000 vpnKong 21661 (RB)
WRT600N v1.1 BS std-nokaid 13637(5Ghz CB)(2.4Ghz AP)
WRT54G v5 BS micro 14684(RB)