Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Aug 24, 2009 22:08 Post subject:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
Was going to test one of these out but I checked 2 stores and I only seen DIR-600's with HW Ver: A1 it said on the side of the box. Is there any chance the A1 hardware version could be supported or should I keep looking for a revb?
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that
"The chosen file is not a valid firmware image file."
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
Was going to test one of these out but I checked 2 stores and I only seen DIR-600's with HW Ver: A1 it said on the side of the box. Is there any chance the A1 hardware version could be supported or should I keep looking for a revb?
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that
"The chosen file is not a valid firmware image file."
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that
"The chosen file is not a valid firmware image file."
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that
"The chosen file is not a valid firmware image file."
I'm wondering if there is a reason as to why only Rev B is supported. Is it just that there is no port yet for Rev A or is it a hardware incompatibility?
I'm wondering if there is a reason as to why only Rev B is supported. Is it just that there is no port yet for Rev A or is it a hardware incompatibility?
perhaps the reason is because nobody donated a hardware Rev A for Sebastian to port.
Maybe you can donate one to him so it can be ported?
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only
I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that
"The chosen file is not a valid firmware image file."
Any idea anyone?
help, btw, the hardware version is B1.
h
the upgrade works perfectly for me
Hi, is yours also a DIR-600 Rev B or B1?
mine is a b1
I've the same status with hcheng, may I ask what is the firmware version and the date of your original one?
The failed update cases same as me whom the firmware seems dated on 2009/04/28 or later, I hope that if you could provide us a newer flash image for tackling this problem.
The newest firmware of original firmware is version 2.01 can be download from www.dlink.com.sg
If you would like to check about the language file of 2.01 in chinese, please check the attachment.
For who have DIR-600 with version 2.00 later, I strongly suggest you DO NOT UPDATE the 2.01 one because after 2.00 2009/04/16 seems changed something about upgrading the firmware though the webpage.
At last,I updated my DIR-600 though emergency http page, and the power led seems not working properly, but the functionality needed to be checked.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Sep 07, 2009 17:54 Post subject:
problem solved. dlink's / alpha networks firmware tools are buggy on 64 bit systems, since i found the sourcecode for them, i was able to fix it and it works now. i checked it with the 2.01 firmware version on a dir 600. firmware is attached _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s