How do I go about donating dlink dir-600 rev. b1 to BS?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page Previous  1, 2, 3  Next
Author Message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6852
Location: Dresden, Germany

PostPosted: Mon Aug 24, 2009 22:08    Post subject: Reply with quote
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only

_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.14.8 #42 SMP PREEMPT Thu Dec 21 18:11:16 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear R7800
Sponsor
shadowandy
DD-WRT Novice


Joined: 23 Feb 2007
Posts: 11

PostPosted: Wed Aug 26, 2009 12:01    Post subject: Reply with quote
Hi Brainslayer,

Thanks! I was hoping the dir-600 will reach you in the end. Will try the firmware!
ssardinajr
DD-WRT Novice


Joined: 27 Aug 2009
Posts: 2

PostPosted: Thu Aug 27, 2009 17:41    Post subject: Reply with quote
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


Was going to test one of these out but I checked 2 stores and I only seen DIR-600's with HW Ver: A1 it said on the side of the box. Is there any chance the A1 hardware version could be supported or should I keep looking for a revb?
hcheng
DD-WRT Novice


Joined: 30 Aug 2009
Posts: 2

PostPosted: Mon Aug 31, 2009 2:38    Post subject: Reply with quote
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that

"The chosen file is not a valid firmware image file."

Any idea anyone?

help, btw, the hardware version is B1.

h
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Mon Aug 31, 2009 7:19    Post subject: Reply with quote
ssardinajr wrote:
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


Was going to test one of these out but I checked 2 stores and I only seen DIR-600's with HW Ver: A1 it said on the side of the box. Is there any chance the A1 hardware version could be supported or should I keep looking for a revb?


do
http://www.dd-wrt.com/wiki/index.php/Broadcom_detection

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
tinytoes
DD-WRT Novice


Joined: 22 Sep 2007
Posts: 33

PostPosted: Wed Sep 02, 2009 6:30    Post subject: Reply with quote
hcheng wrote:
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that

"The chosen file is not a valid firmware image file."

Any idea anyone?

help, btw, the hardware version is B1.

h


the upgrade works perfectly for me
hcheng
DD-WRT Novice


Joined: 30 Aug 2009
Posts: 2

PostPosted: Wed Sep 02, 2009 15:25    Post subject: Reply with quote
tinytoes wrote:
hcheng wrote:
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that

"The chosen file is not a valid firmware image file."

Any idea anyone?

help, btw, the hardware version is B1.

h


the upgrade works perfectly for me


Hi, is yours also a DIR-600 Rev B or B1?
tinytoes
DD-WRT Novice


Joined: 22 Sep 2007
Posts: 33

PostPosted: Fri Sep 04, 2009 7:26    Post subject: Reply with quote
hcheng wrote:
tinytoes wrote:
hcheng wrote:
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that

"The chosen file is not a valid firmware image file."

Any idea anyone?

help, btw, the hardware version is B1.

h


the upgrade works perfectly for me


Hi, is yours also a DIR-600 Rev B or B1?


mine is a b1
thegodfaza
DD-WRT Novice


Joined: 17 Mar 2009
Posts: 9

PostPosted: Fri Sep 04, 2009 20:52    Post subject: Reply with quote
I'm wondering if there is a reason as to why only Rev B is supported. Is it just that there is no port yet for Rev A or is it a hardware incompatibility?
tinytoes
DD-WRT Novice


Joined: 22 Sep 2007
Posts: 33

PostPosted: Mon Sep 07, 2009 3:07    Post subject: Reply with quote
thegodfaza wrote:
I'm wondering if there is a reason as to why only Rev B is supported. Is it just that there is no port yet for Rev A or is it a hardware incompatibility?


perhaps the reason is because nobody donated a hardware Rev A for Sebastian to port.

Maybe you can donate one to him so it can be ported?

Rev A seems to be running Atheros.
killerkillua
DD-WRT Novice


Joined: 27 Aug 2009
Posts: 3

PostPosted: Mon Sep 07, 2009 8:29    Post subject: Reply with quote
tinytoes wrote:
hcheng wrote:
tinytoes wrote:
hcheng wrote:
BrainSlayer wrote:
update. dir600 works now. port is now done. you may try the attached file. it can be directly flashed from the dir600 web interface.
this firmware is made for dir600 revb only


I downloaded the file and tried the update. When I load the image on the web interface with this file, it tells me that

"The chosen file is not a valid firmware image file."

Any idea anyone?

help, btw, the hardware version is B1.

h


the upgrade works perfectly for me


Hi, is yours also a DIR-600 Rev B or B1?


mine is a b1


I've the same status with hcheng, may I ask what is the firmware version and the date of your original one?
killerkillua
DD-WRT Novice


Joined: 27 Aug 2009
Posts: 3

PostPosted: Mon Sep 07, 2009 9:18    Post subject: Reply with quote
Dear BrainSlayer,

The failed update cases same as me whom the firmware seems dated on 2009/04/28 or later, I hope that if you could provide us a newer flash image for tackling this problem.
The newest firmware of original firmware is version 2.01 can be download from www.dlink.com.sg
If you would like to check about the language file of 2.01 in chinese, please check the attachment.

For who have DIR-600 with version 2.00 later, I strongly suggest you DO NOT UPDATE the 2.01 one because after 2.00 2009/04/16 seems changed something about upgrading the firmware though the webpage.

At last,I updated my DIR-600 though emergency http page, and the power led seems not working properly, but the functionality needed to be checked.
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6852
Location: Dresden, Germany

PostPosted: Mon Sep 07, 2009 17:19    Post subject: Reply with quote
i will take a look on it
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.14.8 #42 SMP PREEMPT Thu Dec 21 18:11:16 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear R7800
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6852
Location: Dresden, Germany

PostPosted: Mon Sep 07, 2009 17:54    Post subject: Reply with quote
problem solved. dlink's / alpha networks firmware tools are buggy on 64 bit systems, since i found the sourcecode for them, i was able to fix it and it works now. i checked it with the 2.01 firmware version on a dir 600. firmware is attached
_________________
one cigarette costs 2 minutes of your life.
one bottle of beer costs 4 minutes of your life.
one working day costs 8 hours of your life.

Yummee:
Linux DD-WRT 4.14.8 #42 SMP PREEMPT Thu Dec 21 18:11:16 CET 2017 armv7l DD-WRT
root@DD-WRT:/sys# nvram get DD_BOARD
Netgear R7800
7starz
DD-WRT Novice


Joined: 15 Sep 2009
Posts: 6

PostPosted: Tue Sep 15, 2009 4:00    Post subject: Reply with quote
Great post!
I just bought a dir600 revb1 and it is on the way Smile
will post after I test the flash.
thanks BrainSlayer for the great work!
Goto page Previous  1, 2, 3  Next Display posts from previous:    Page 2 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum