Help Me! No he Podido Flashar WRT54G v5.0

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
fictisio
DD-WRT Novice


Joined: 18 Jun 2006
Posts: 17

PostPosted: Tue Jun 20, 2006 4:20    Post subject: Help Me! No he Podido Flashar WRT54G v5.0 Reply with quote
Hola!

He tratado de Flashar mi WRT54G v5.0, construí éste cable



he verificado que funcione y de hecho creo que si por que me muestra la sgte pantalla



He Realizado los sgtes pasos:
Antes que nada Creo un CFE.BIN con el "Bootloader Creator 2.0" de Skynet
y cambio la direccion IP de mi PC a estatica con los sgtes parametros:



y ademas la configuro como "Force 10 Half duplex" y despues de esto Entro a la linea de Comandos y ejecuto:
1- wrt54g -backup:wholeflash (Lo Realiza)
2- wrt54g -erase:wholeflash /noemw (Lo Realiza)
3- wrt54g -flash:CFE /noreset (Lo Realiza)
4- le quito corriente al router y luego vuelvo a darle
5- hago ping a 192.168.1.245 y y ejecuto el tftp y me aparece esto:



por lo que me doy cuenta en el momento que ejecuto el tftp veo al router parpadear muy rápidamente como si efectivamente recibiera el archivo entonces espero un buen rato (hasta 10 minutos) y nada! solo el led de power parpadeando. le he quitado corriente y vuelto a poner, seguido he ejecutado "wrt54g -erase:nvram /noerase" y lo realiza pero ni así da respuesta....!

Hasta lo he tratado de flasharlo renombrando el "dd-wrt.v23_micro_wrt54g.bin" a KERNEL.BIN y nada! y luego subirlo con "wrt54g -flash:kernel" pero ni señas de vida....

lo he restaurado con la copia anteriormente realizada (wrt54g -flash:wholeflash /noemw) y vuelve a quedar de fabrica funcionando.

Por favor que estoy haciendo mal? Sad Question
Sponsor
CaScAdE
DD-WRT Guru


Joined: 18 Jun 2006
Posts: 1110
Location: Kiel (54.4247,10.1721)

PostPosted: Tue Jun 20, 2006 6:53    Post subject: Reply with quote
Although I don't understand everything you were talking about I still recommend you one thing (WITHOUT WARRANTY!):

try the dd-wrt.v23_micro_generic.bin

It worked for me, dunno why but with the dd-wrt.v23_micro_wrt54g.bin I had the same problems and now I have two boxes running, one at home and one at work, the one at home:

Code:
Firmware: DD-WRT v23 SP1 Final (05/16/06) micro
Time: 08:51:52 up 7 days, 22:50, load average: 0.16, 0.03, 0.01
WAN disabled


Hope this helps! And besides: Nice post, much information *g* But next time try the spanish (guess it is spanisch) forum Very Happy
Matthiaz
DD-WRT Guru


Joined: 12 Jun 2006
Posts: 635

PostPosted: Tue Jun 20, 2006 9:07    Post subject: Reply with quote
Why is that spanish dude opening unreadable threads like this!??! This is the DD-WRT (English) discussion forum...
GdS
DD-WRT Novice


Joined: 14 Jun 2006
Posts: 16

PostPosted: Tue Jun 20, 2006 11:18    Post subject: Re: Help Me! No he Podido Flashar WRT54G v5.0 Reply with quote
I translated to english so you can get help:

fictisio wrote:
Hi CIL!

I tried to flash my WRT54G v5.0, so I build this cable:

Много красивых чудес в мире, а сколько таких красивых мест в России?! Хотелось бы еще рассказать Вам обо всём необычном и удивительном, что обитает в морях и океанах, а закончить небольшой библейской проповедью, но видимо в другой раз!


I thinks it is working, look this screen:



I did this:
Created CFE.BIN using Skynet "Bootloader Creator 2.0", changed pc ip address to fixed to this:



I also set "Force 10 Half duplex"

Done that, on command line I did:
1- wrt54g -backup:wholeflash (worked ok)
2- wrt54g -erase:wholeflash /noemw (worked ok)
3- wrt54g -flash:CFE /noreset (worked ok)
4- power cicle router and:
5- ping 192.168.1.245, then run tftp:



then router lights blinks showing activity, I guess it successfully loads firmware via tftp, then wait up to 10 mins, just power led blinks.
Also did "wrt54g -erase:nvram /noerase" but nothing.

I also tried renaming wrt.v23_micro_wrt54g.bin" a KERNEL.BIN and flashing that, not response.

Finally I flashed it using the backup image (wrt54g - lash:wholeflash /noemw), it works as new.

What I'm doing wrong? Sad Question

_________________
Сто самых красивых мест России


Last edited by GdS on Sat Nov 10, 2012 17:51; edited 2 times in total
fictisio
DD-WRT Novice


Joined: 18 Jun 2006
Posts: 17

PostPosted: Tue Jun 20, 2006 23:27    Post subject: Al Fin! Reply with quote
Gracias por su recomendaciones!

AL fin pude flaharlo y el problema radicaba que a mi WRT54G V5.0 lo estaba flashando con la version "dd-wrt.v23_micro_wrt54g.bin" y por eso no me booteba...!

Utilizé la versión "dd-wrt.v23_micro_generic.bin" y listo! al fin pude tener en mi linksys el DD-WRT...!

Gracias...!
CaScAdE
DD-WRT Guru


Joined: 18 Jun 2006
Posts: 1110
Location: Kiel (54.4247,10.1721)

PostPosted: Tue Jun 20, 2006 23:31    Post subject: Reply with quote
Oh well, I think he did it +g+
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum