Thank you for your hard work. I just flashed my TM without any issues.
Will there be a similar CFE updater for the WRT54G-RG? I have heard the hardware is identical. I am deploying these in a hotel and have access to the RG version and would love to have an easy method to get dd-wrt running rather than messing with jtag.
i have obtained a wrt54g-rg as well and would also appreciate a CFE updater for it, so as to not have to use JTAG method. thanks.
Great guide! Could someone direct me to the latest stable build for this router, i do not undertand the downloads section, i see v24 and v24 sp1 but then i saw somewhere else where sp1 is not stable. I am unsure where to look for the latest builds even for future upgrades so if someone could direct me it would be appreciated.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Tue Aug 11, 2009 16:42 Post subject:
Slap wrote:
Hey!
Any news on a WRT54G-RG non-jtag updater?
I don't think it is being worked on. Probably not enough demand. afaik, there have been two, maybe three guys that just used jtag to flash a dd-wrt, tm cfe.
However, the being worked on priority thing is just my thoughts. I don't know one way or the other if / when it will be worked on.
TM's are easy to work with and seem to love jtag. It's not difficult to flash the cfe. _________________ [Moderator Deleted]
To begin with I would like to thanks for the work being done here, marvelous.
After saying that, I am about to flash a -tm. I read the instructions. However, I am puzzled regarding which build should I use. Suggestions are welcome
Thanks in advance
Joined: 04 Oct 2007 Posts: 1258 Location: Ohio USA
Posted: Tue Aug 18, 2009 2:11 Post subject:
I've updated the instructions here and on the Wiki with the latest recommended v24-SP2 12548 build and added a note to check the Peacock thread for recommended build numbers if unsure. _________________ (05/02/17) std - 31924
Linksys WRT400N
Buffalo WHR-G300N
Does anyone know where to get the oem firmware bin from? I think the rar posted is a jtag backup of kernel. That will take a while to flash via jtag. I never tried to use the management screen or the gui to flash a jtag kernel backup.. It should work.. Right? _________________ [Moderator Deleted]
Does anyone know where to get the oem firmware bin from? I think the rar posted is a jtag backup of kernel. That will take a while to flash via jtag. I never tried to use the management screen or the gui to flash a jtag kernel backup.. It should work.. Right?
If you are talking about the WRT54G-RG, then here is what I found. This guy made a mirror backup of the Linksys ftp site, which happens to have the WRT54G-RG firmware:
today i flashed my WRT54G-TM everything worked fine.i forgot to turn off my av(AVG)and my firewall(zone alarm)but all worked fine, only after the cfe download the router respond after 10 minutes not 5. thanks everyone.
Posted: Mon Jan 18, 2010 0:37 Post subject: v24 preSP2 [Beta] Build 13064?
Hello, is the v24 preSP2 [Beta] Build 13064 the newest and stablest build to load on the WRT54G-TM? Or are there better and more stable builds? I am always weary of "Beta" builds. Also, any advantage to loading the MEGA Generic over any others?
I was able to successfully installed dd-wrt and it works great as a router. But since I bought a wrt320n, i needed the 54tm to become an AP, but am not able to:
I have decided to just convert this back to stock firmware and hope that with that it can solve my problems. Is there a way back or a way to go to sveasoft alchemy (a firmware i am using on another router tuned AP)?
Also, any advantage to loading the