How do I fix this problem with my WRT54G v2, or is it bricke

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3
Author Message
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Fri Jul 17, 2009 23:18    Post subject: Reply with quote
This is a g2 v1.3 booting... The hardware error at the end is when I unplugged it.:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\>ping -t 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.1: bytes=32 time=2ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time<1ms TTL=100
Reply from 192.168.1.1: bytes=32 time=132ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=132ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Request timed out.
Hardware error.
Hardware error.
Hardware error.

Ping statistics for 192.168.1.1:
Packets: Sent = 29, Received = 21, Lost = 8 (27% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 132ms, Average = 6ms
Control-C
^C
C:\>


So... I don't know what to say except clear nvram & kernel with jtag or just keep trying. Several have posted that they "finally got it"

_________________
[Moderator Deleted] Shocked
Sponsor
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Fri Jul 17, 2009 23:30    Post subject: Reply with quote
This has been reported to work on more than the 610. Try it. However your router is in "limbo" but worth a shot.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=54216&postdays=0&postorder=asc&start=38

_________________
[Moderator Deleted] Shocked
Wizzer
DD-WRT Novice


Joined: 16 Jul 2009
Posts: 23

PostPosted: Sat Jul 18, 2009 4:15    Post subject: Reply with quote
Nope, those didn't work. I'm going to keep trying but I think I'll eventually have to use the JTAG.
Wizzer
DD-WRT Novice


Joined: 16 Jul 2009
Posts: 23

PostPosted: Sun Jul 19, 2009 8:22    Post subject: Reply with quote
Turned off windows firewall and the tftp utility worked fine.

Now what version should I throw on here?
autobot
DD-WRT Guru


Joined: 07 May 2009
Posts: 1596

PostPosted: Sun Jul 19, 2009 8:31    Post subject: Reply with quote
Wizzer wrote:
Turned off windows firewall and the tftp utility worked fine.

Now what version should I throw on here?


That's a OMFG moment, never heard that before. I'm running the latest Eko newd not newd2 with no issues whatsoever.
Wizzer
DD-WRT Novice


Joined: 16 Jul 2009
Posts: 23

PostPosted: Sun Jul 19, 2009 8:47    Post subject: Reply with quote
is yours the v.2 also?
autobot
DD-WRT Guru


Joined: 07 May 2009
Posts: 1596

PostPosted: Sun Jul 19, 2009 8:55    Post subject: Reply with quote
Wizzer wrote:
is yours the v.2 also?


No but the build is good, that's why I referenced it. You have to decide for yourself, you can run any the 12XXX series or go with something older just not v23.
Wizzer
DD-WRT Novice


Joined: 16 Jul 2009
Posts: 23

PostPosted: Sun Jul 19, 2009 8:58    Post subject: Reply with quote
http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/07-18-09-r12523/broadcom that folder ok?
autobot
DD-WRT Guru


Joined: 07 May 2009
Posts: 1596

PostPosted: Sun Jul 19, 2009 9:06    Post subject: Reply with quote
Wizzer wrote:
http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/07-18-09-r12523/broadcom that folder ok?


I don't test BrainSlayer builds so I can't speak on them. Personally I would grab one from Eko ftp://dd-wrt.com/others/eko/V24_TNG/

But once again *not* newd2.
Wizzer
DD-WRT Novice


Joined: 16 Jul 2009
Posts: 23

PostPosted: Sun Jul 19, 2009 9:08    Post subject: Reply with quote
man i get lost in these directories, lol.
thank you
to clear this up, i have a wrt54g v.2 i guess you guys would put it, not the newer sleeker looking wrt54g2.

Successful upgrade. I'm posting while it is in use now. I want to thank everyone for their help.
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum