[fleetinfo]

hi everyone im new on your forum.

im from quebec in canada and im not too good in english.!

i have read all of your topic, i successfuly flashed both of my eoc-5610 .

i flashed to dd-wrt to trying to be able to get 108mb link! on the box they said 108mb and no way to enable superg with orginal firmware.

i have switch both of my 5610 to external antenna and i have to 14dbi panel on each building ( less than 1000 ft ). when the 5610s set to 5ghz , the power go physicaly to the 2.4ghz SMA plug. this is not a big problem but maybe on your next release you can take a look to that.

so 1 antenna is in ap i connect to it via laptop no problem the second is set to client-brige ( i tried wds client too ) the antenna connect no problem. i can reach the dd-wrt menu when i assign a static ip and plug directly into the bridge antenna.

my setup: d-link router is dhcp enable , 5610 in ap mode connected to router with dhcp forwader enable. but the bridge dont assign anything. i tried 3 hours!

help me plzzz

[Sash]

1st install the latest beta mentioned in the router database

[fleetinfo]

im not stupid that the first thing i did
it seem that the bridge client dosent allow traffic

except if we log to dd-wrt to configure the antenna

im stuck there and no more access now to other building

im interested to buy your product but it seem that we have difficulty to get support when we have some problem.

plz help

[Sash]

use

wiki: wds

[fleetinfo]

is that soo hard to write a couple more letters on your keyboard?

i really dont understand what you mean

thx

[fleetinfo]

i know how a network my network was running fine before i installed your firmware. i have a computer store im selling a lot of router and wifi kit. i dont want to have a negative experience with you but dont act as a technician if you dont know how your product work.

do what you seem to be badly a moderator that dont want to take is time to be one.

thx for the great support you give to most of the guy coming and leaving after getting bad experience with you.

[Sash]

the easiest thing would have been to read the forum rules....which u havent done ...obvoisuly