Author
Message
juched DD-WRT Novice Joined: 18 Jun 2009 Posts: 34
Posted: Sat Jun 20, 2009 15:31 Post subject: Linksys WRT300n V1.1
Linksys WRT300n V1.1
CPU Model
Broadcom BCM4785 chip rev 2
CPU Clock
300 MHz
Description:
Download
Filename:
WRT300Nv11-cfe.bin
Filesize:
256 KB
Downloaded:
1312 Time(s)
Back to top
Sponsor
roytam1 DD-WRT Novice Joined: 01 Aug 2006 Posts: 14
Posted: Sun Jun 21, 2009 10:13 Post subject:
WRT54G v5 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.
EDIT: It should be a v5 device, sorry for any inconvenience caused.
Description:
Download
Filename:
cfe.bin
Filesize:
256 KB
Downloaded:
1443 Time(s)
Last edited by roytam1 on Sun Aug 02, 2009 9:46; edited 2 times in total
Back to top
prairiedog6791 DD-WRT Novice Joined: 24 Jun 2009 Posts: 1
Posted: Wed Jun 24, 2009 22:04 Post subject: cfe.bin for wrt54gs v1
Hi All,
I desperately need a cfe for this router; none from the various websites or cfe generators have worked properly.
If anyone knows a good repo of these or could send it to me I'd be most grateful...I see that Pandora-Box sent in one for this same model.
When I get this router going again I'll retrieve bootloaders from my other routers and post them too!
-Mike
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu Jun 25, 2009 15:04 Post subject: Re: cfe.bin for wrt54gs v1
prairiedog6791 wrote: Hi All,
I desperately need a cfe for this router; none from the various websites or cfe generators have worked properly.
If anyone knows a good repo of these or could send it to me I'd be most grateful...I see that Pandora-Box sent in one for this same model.
When I get this router going again I'll retrieve bootloaders from my other routers and post them too!
-Mike
Send me a PM with your MAC....I have a known good CFE for the GSv1.0
redhawk
_________________ The only stupid question....is the unasked one.
Back to top
HuKuToC DD-WRT Novice Joined: 19 Jun 2009 Posts: 4
Posted: Sun Jun 28, 2009 20:05 Post subject:
D Link Dir-320
FCC ID:KA2DIR320A1
GUI back up CFE (via http)
Sorry, the rest is unknown for me
Description:
Download
Filename:
cfe.bin
Filesize:
256 KB
Downloaded:
1061 Time(s)
Back to top
uberushaximus DD-WRT Novice Joined: 07 Jul 2009 Posts: 13
Posted: Wed Jul 08, 2009 17:38 Post subject: WRT310n Cfe
I ripped this via SCP from a WRT310n (v1.0)
The FCCID is 087-WRT310N, cheers.
Description:
Download
Filename:
cfe.bin
Filesize:
256 KB
Downloaded:
1281 Time(s)
Back to top
ddggttff3 DD-WRT User Joined: 06 Mar 2009 Posts: 107 Location: MinneSOTA!
Posted: Sun Jul 26, 2009 18:37 Post subject:
emailed in my CFE, and info. its for a WRT310N V1
Back to top
X-TraxxX DD-WRT User Joined: 15 Mar 2007 Posts: 65
Posted: Wed Jul 29, 2009 6:14 Post subject:
roytam1 wrote: WRT54G v6 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.
Should the same Firmware version be used to aid in the recovery of a bricked wrt54g v6 when using this CFE?
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Wed Jul 29, 2009 11:58 Post subject:
X-TraxxX wrote: roytam1 wrote: WRT54G v6 CFE
get from cat /dev/mtd/0 > /tmp/www/cfe.bin
Firmware: DD-WRT v23 SP3 (03/04/07) micro, don't have time testing for v24 SP1.
Should the same Firmware version be used to aid in the recovery of a bricked wrt54g v6 when using this CFE?
No...the CFE is untouched by the FW...if you use TJTAG to flash the CFE onto the v6...you can flash any FW version of micro using tftp.
redhawk
_________________ The only stupid question....is the unasked one.
Back to top
flowersrj DD-WRT Novice Joined: 03 Apr 2009 Posts: 48
Posted: Sun Aug 02, 2009 15:00 Post subject:
Happy to contribute ...
Asus Wl-500gP v1
Broadcom BCM4704 chip rev 9
v24-sp2 voip build 12533
Description:
Download
Filename:
cfe.bin
Filesize:
256 KB
Downloaded:
1053 Time(s)
Back to top
3xpl0it DD-WRT User Joined: 26 Jul 2008 Posts: 74
Posted: Thu Aug 06, 2009 0:00 Post subject:
Could someone please post up a working CFE of a WRT64GS Ver. 6
Many thanks in advance!
-3xpl0it
Back to top
DHC_DarkShadow DD-WRT Guru Joined: 22 Jun 2008 Posts: 2440 Location: Am now Dark_Shadow
Posted: Thu Aug 06, 2009 0:28 Post subject:
3xpl0it wrote: Could someone please post up a working CFE of a WRT64GS Ver. 6
Many thanks in advance!
-3xpl0it
Yes I am interested too. I have all the posted cfe and wholeflash that are able to be downloaded and plan on trying to make a wiki page, and this is one of the one's I don't have yet.
_________________The New Me
Back to top
barryware DD-WRT Guru Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Thu Aug 06, 2009 14:20 Post subject: Wrt54GS V6 CFE
wrt54gS v6 cfe
_________________[Moderator Deleted]
Back to top
DHC_DarkShadow DD-WRT Guru Joined: 22 Jun 2008 Posts: 2440 Location: Am now Dark_Shadow
Posted: Thu Aug 06, 2009 14:37 Post subject:
Request WRT610N CFE v.12 and v.16
_________________The New Me
Back to top
DHC_DarkShadow DD-WRT Guru Joined: 22 Jun 2008 Posts: 2440 Location: Am now Dark_Shadow
Posted: Thu Aug 06, 2009 20:37 Post subject:
barryware wrote: DHC_DarkShadow wrote: CFE's or wholeflash's can be emailed to me at
email=dd-wrt@darkhaven.org
I made a folder called new_uploads. If someone just wants to upload a cfe instead of e-mailing it.
Uploads should go there. Then someone can change the macs to generics (DHC ), then file them in the proper place.
So... DD-WRT'sters.. upload your cfe's and they will be checked, macs changed to generic and filed in the correct folder.
If you need a cfe and have a linksys, you need to look in the linksys folder
url=ftp://ftp.barryware.net
username = dd-wrt
password = router
All Mac's will be changed to generic when possible.
_________________The New Me
Back to top