Posted: Sat Jun 27, 2009 23:45 Post subject: Can you solder multi antenna 's to a wrt54g ?
I have 2 completely dead wrt54g v8.2's and one wrt54g v5 that is working fine. I was wondering could I take the antennas from the dead 8.2's and case mod and solder the other antennas into the v5. Would I gain anything or just mess up the v5.
Posted: Sun Jun 28, 2009 19:27 Post subject: Re: Can you solder multi antenna 's to a wrt54g ?
drillbit wrote:
I have 2 completely dead wrt54g v8.2's and one wrt54g v5 that is working fine. I was wondering could I take the antennas from the dead 8.2's and case mod and solder the other antennas into the v5. Would I gain anything or just mess up the v5.
No you would not Gain nothing but new holes in your router
Just replace the antennas on it with some Good 16dbi antennas
Look on ebay you can find them low as $12.99 Eatch
_________________ You can find me Here:
http://www.facebook.com/#!/profile.php?id=100001843308666
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Mon Jun 29, 2009 0:27 Post subject:
I've always liked this tutorial. It describes how to make your own High gain antenna...although it only gains you about 2-3dB over the stock antenna...but it's free (pretty much)
old post i know, but i just wanted to share a little tid-bit.
i had my doubts to say the very least on this, but i tried it out and to my surprise, i got precisely the results that were claimed. very impressive for a place offering antenna designs totally free, and the material cost is basically nothing.
Joined: 10 Aug 2009 Posts: 42 Location: Michigan, USA
Posted: Thu Oct 29, 2009 17:44 Post subject:
stay away from those 16dBi antennas.. they are junk.
Stick with 9dBi. They are much more reliable.
I get about 2x the range with my cheap 9dBi antennas than I did with any one of the 5 16dBi antennas I bought. _________________ EOC-5610 -dd-wrt soon....
WRT54g-tm -Mega Build
WRT350n -Mega Build, w/ ext antennas