Posted: Fri Mar 27, 2009 12:58 Post subject: Best build for wrt310n?
I have a wrt310n that has older firmware on it - DD-WRT v24-sp2 (11/05/0 std - build 10776M NEWD Eko. Is there anything better out yet? I'd like to see my wireless speed jump back up to what it was on the stock firmware if at all possible yet.
The one on the peacock thread is pretty good, well tested no fuss, with lots of previous bugs fixed. Personally, 11650 was very stable for me, and it is my fallback build if any of the new test build were unstable.
Otherwise, you can join the new ranks of testing the latest one, 11793. Just flashed that and its looking fine.
I flashed with the 11793, said my upgrade was successful, but I can't do anything. I can't get to the gui, the router doesn't seem to be assigning an ip address but my computer will connect to it with limited connectivity. Where do I go from here to try and reflash it?
did the ping tests, no pings, everything times out. is it possible my ip address got changed from 192.168.1.1 in when i flashed? Otherwise what would my next step be?
I static ip, did a 30-30-30, no password, did the tfpt2 to the mini build for the 310n, still unable to get to the gui, when I ping now I get 192.168.1.2 host unavailable and then request timed out.
if you did a 30-30-30 it should be reset to defaults... 192.168.1.1 _________________ 2x WRT54G v5, 2x WRT54G v2
1x WRT54G-TM
1x WRT54GL
1x WRT54G2 v1
2x BUFFALO WHR-G54S
2x BUFFALO WHR-G300N v2
1x BUFFLOW WHR-HP-G300N
1x La Fonera
FON Client Bridge tutorial
Joined: 13 Nov 2008 Posts: 5266 Location: CENTRAL Midnowhere
Posted: Sat Mar 28, 2009 12:59 Post subject:
Power cycle the router and watch for any ttl=100 responses. If everything is set up properly, and you are doing the process properly, and it doesn't work, try the recovery mode in the link at the end of note 11.
If none of that works, you might have to look into jtag. What did you do to get in this state? Fail to wait? _________________ Warning: I'm "out of my element!"
http://www.youtube.com/watch?v=MjYJ7zZ9BRw&NR=1
I got the router flashed, I can now get into the gui, but when I go to change any of the settings and apply them I get a black screen and the changes don't apply. I can't even upgrade to a newer firmware either, it does the same thing.