Flashing Guide for EOC-2610 FW V.24 only

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Senao Devices
Author Message
DD-WRT Partner

Joined: 23 Dec 2008
Posts: 6

PostPosted: Tue Dec 23, 2008 6:07    Post subject: Flashing Guide for EOC-2610 FW V.24 only Reply with quote
ATM there is no possible way to remove DD-WRT and get back to the Senao firmware!

1. Download the free web server: (you are free to use any other web server that you are familiar with). http://www.ashleybrown.co.uk/downloads/iws2.exe

2. Create a folder C:\test

3. Download the special V.25 only DD-WRT image from Senao server and copy DD-WRT_newimage.bin into C:\test
This image contains DD-WRT firmware; once loaded no additional porting is required.

4. Configure your PC with IP (you can use any other IP also)

5. Start the web server by executing iws.exe and double click on the icon on your system-tray at the bottom-right corner.

6. Configure the web server with the following configuration; click OK when done.

Public Folder ---------> c:\test\
Default File ----------> index.html
Port ------------------> 80

7. Please test the server DD-WRT_newimage.bin; it may take a few seconds before the page is completely loaded by your web-browser.

8. Power on EOC-2610 and make sure it is complete booted. You can verify it by accessing its web page UI.

9. Once booted; telnet; the username & password are both “admin”

10. Under the console prompt type in the following commands in REDtogether with the address link

cd /tmp
cat DD-WRT_newimage.bin > /dev/mtdblock0

IMPORTANT: Please note that never interrupt the last command (cat …) under any circumstance (make sure the power is table and do not touch anything during the 3~10 minutes write process). It will cause incomplete write on the flash and make it unbootable. Do not mis-type anything!


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Tue Dec 23, 2008 19:54    Post subject: Reply with quote
Forum Guidelines...How to get help
Forum Rules
Throw some buzzwords into the WIKI search Exclamation
I'm NOT rude, just offer pure facts!
Atheros (TP-Link & Clones, etc ) debrick service in EU
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
DD-WRT Novice

Joined: 13 Jan 2009
Posts: 1

PostPosted: Tue Jan 13, 2009 23:13    Post subject: Revert to Factory firmware Reply with quote
I have successfully upgrade the EOC-2610 with this method, anyway I decide not to activate the license & I want to revert to factory firmware. How to do it? Telnet seems like not working on trial version, even it is already enable in the Web GUI administration.

Connecting To Could not open connection to the host, on port 23: Connection failed


Site Admin

Joined: 06 Jun 2006
Posts: 6971
Location: Dresden, Germany

PostPosted: Tue Feb 03, 2009 13:08    Post subject: Reply with quote
thats true. telnet and ssh is disabled until its activated
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Display posts from previous:    Page 1 of 1
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Senao Devices All times are GMT


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum