Author
Message
oxceed DD-WRT Novice Joined: 16 Oct 2008 Posts: 4
Posted: Thu Oct 16, 2008 5:22 Post subject:
i want cfe.bin to paradyne 6211-i2 proc broadcom6338
flash mx29lv320b from jtag please
=======================================
ST5xx/780 EJTAG Debrick Utility v1.1
This Utility was changed from WRT54G to
work correctly with Speedtouch Routers
=======================================
Probing bus ... Done
Instruction Length set to 5
CPU Chip ID: 00000110001100111000000101111111 (0633817F)
*** Found a Broadcom BCM6338 Rev 1 CPU chip ***
- EJTAG IMPCODE ....... : 00000000100000000000100100000100 (00800904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor Entered Debug Mode!> ... Done
Clearing Watchdog ... Done
Probing Flash at (Flash Window: 0x1fc00000) ... Done
Flash Vendor ID: 00000000000000000000000011000010 (000000C2)
Flash Device ID: 00000000000000000010001010101000 (000022A8)
*** Found a MX29LV320B 2Mx16 BotB (4MB) Flash Chip ***
- Flash Chip Window Start .... : 1fc00000
- Flash Chip Window Length ... : 00400000
- Selected Area Start ........ : 00000000
- Selected Area Length ....... : 00000000
*** REQUESTED OPERATION IS COMPLETE ***
Description:
Filesize:
829.13 KB
Viewed:
54820 Time(s)
Back to top
Sponsor
nitrous DD-WRT Novice Joined: 11 Nov 2008 Posts: 1
Posted: Tue Nov 11, 2008 23:40 Post subject:
all from am604g
cfe
kernel
nvram
wholeflash
mac address F1:F2:F3:F4:F5:F6
Description:
Download
Filename:
am604g.rar
Filesize:
5.73 MB
Downloaded:
2638 Time(s)
Back to top
Doffo DD-WRT Novice Joined: 13 Nov 2008 Posts: 34
Posted: Mon Nov 17, 2008 3:03 Post subject: WRT54GS v2
This here is a modified CFE.BIN where boot_wait is on and some other option im not sure of, but it works GREAT on my WRT54GSv2...
Also, this is the CFE.BIN which I changed the
sdram_init=0x000b
to
sdram_init=0x010b
The reason for this is cause some GS models will
"brick" the second you hit reset to factory defaults.
ENJOY!-=-=-
Description:
WRT54GS v2 w/boot_wait on + sdram_init=0x010b
Download
Filename:
CFE.bin
Filesize:
256 KB
Downloaded:
2953 Time(s)
Back to top
santu DD-WRT Novice Joined: 30 Sep 2008 Posts: 4
Posted: Fri Nov 21, 2008 22:38 Post subject:
I need to find one for a linksys wrt54gs v3
Edit: using the skynet creator do you need the mac address of a similar router or does it matter? (got mad destroyed original case)
Scratch that I used the skynet utility and a mac of all 0 and that worked
Description:
Linksys Wrt54gs V3 CFE.Bin
Download
Filename:
CFE.BIN
Filesize:
256 KB
Downloaded:
2597 Time(s)
Back to top
dread22 DD-WRT Novice Joined: 30 Nov 2008 Posts: 13
Posted: Tue Dec 30, 2008 21:56 Post subject:
Requesting CFE for linksys 160n v1
Back to top
mototun DD-WRT Novice Joined: 15 Dec 2008 Posts: 9
Posted: Sat Jan 03, 2009 7:48 Post subject: Netgear DG834GTB german version
via JTAG
Description:
Download
Filename:
WHOLEFLASH.BIN.rar
Filesize:
3.15 MB
Downloaded:
2108 Time(s)
Description:
Download
Filename:
CFE.BIN.rar
Filesize:
224.79 KB
Downloaded:
2041 Time(s)
Back to top
domi-germany DD-WRT Novice Joined: 28 Jan 2009 Posts: 10
Posted: Wed Jan 28, 2009 20:35 Post subject: Request for WGR614L
hi
i need the cfe from WGR614v8/L EU verison
pls post it
Thanks
dominic
Back to top
ns2397 DD-WRT Novice Joined: 12 Oct 2008 Posts: 18
Posted: Sat Jan 31, 2009 1:56 Post subject:
Anyone can post
WRT350N ver.1
THanks.
Back to top
AlwaysConnected DD-WRT User Joined: 08 Nov 2006 Posts: 113 Location: NL
Posted: Sun Feb 01, 2009 13:47 Post subject:
LINKSYS WRT54GL WRT54G-TM
With DDWRT mega
its cfe with ddwrt
Description:
Download
Filename:
cfe.bin
Filesize:
256 KB
Downloaded:
2299 Time(s)
_________________ ___________________________________
WRT54GL v1.1 WRT54G-TM Firmware: DD-WRT v24-sp2 (02/03/10) big - build 13832 Last edited by AlwaysConnected on Sun Feb 01, 2009 18:47; edited 1 time in total
Back to top
Shawn360 DD-WRT Guru Joined: 26 Jul 2008 Posts: 1237
Back to top
beltway DD-WRT Novice Joined: 03 Jan 2009 Posts: 8
Posted: Wed Feb 04, 2009 15:43 Post subject:
Emailed CFE.bin (from GUI) for:
WRT600N v1.1
Running 11483M NEWD Eko
Description:
Download
Filename:
600N-v1.1-cfe.bin
Filesize:
256 KB
Downloaded:
1810 Time(s)
Back to top
huclbuck DD-WRT Novice Joined: 19 Jan 2008 Posts: 8
Posted: Tue Feb 17, 2009 3:30 Post subject: WRT54GS ver 7
Hello, I need this cfe.bin file, WRT54GS ver 7
Thanks
Back to top
Shawn360 DD-WRT Guru Joined: 26 Jul 2008 Posts: 1237
Back to top
redhawk0 DD-WRT Guru Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Thu Feb 19, 2009 17:26 Post subject:
CFE from a WRTSL54GS unit. (MAC address has been made generic)
Extracted using gui backup method.
redhawk
Description:
Download
Filename:
cfe_WRTSL54GS.bin
Filesize:
256 KB
Downloaded:
2204 Time(s)
_________________ The only stupid question....is the unasked one.
Back to top
Bust3D DD-WRT Novice Joined: 16 Feb 2009 Posts: 15
Posted: Fri Feb 20, 2009 18:19 Post subject: WRT54G V8 still Bricked.
Hi all.
I have WRT54G V8 Bricked.
All lan and wan leds lighting continously.
I made the jtag interface, programmed with CFE,BSP,WHOLEFLASH all i found on forums and to
make compare i backup all after flash and all
backups was same what i flashed with.
So, it's working jtag cause it's flashing with correct content. Can anybody help me unbrick this device ?
PS.
After all flash procedures the leds are still lighting. (ON).
I have Samsung Flash k8d1716ubc.
Back to top