root@XXX DD-WRT:/# ipkg-opt install vncrepeater
Installing vncrepeater (0.12-1) to /opt/...
Downloading http://downloads.openwrt.org/backports/rc5/vncrepeater_0.12-1_mipsel.ipk
Installing uclibc++ (0.1.11-2) to /opt/...
Downloading http://downloads.openwrt.org/whiterussian/packages/uclibc++_0.1.11-2_mipsel.ipk
ipkg: /usr/lib/libuClibc++-0.1.11.so: Read-only file system
ipkg: Cannot create symlink from ./usr/lib/libuClibc++.so.0 to 'libuClibc++-0.1.11.so': Read-only file system
ipkg: /usr/sbin/vncrepeater: Read-only file system
ipkg: /etc/vncrepeater.conf: Read-only file system
ipkg: /etc/init.d/S60vncrepeater: Read-only file system
Configuring uclibc++
Configuring vncrepeater
Successfully terminated.
how do i get write access on
/etc/
/etc/init.d/
/usr/sbin/
/usr/lib/
or how to move on....
/skipper.dk _________________ 1 Asus RT-N16 with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Asus WL-500g Premium with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Synology ds101g+ with ds109 firmware and optware running..
1 Synology DS101 bricked
1 Synology DS409 optware running..
root@XXX DD-WRT:/# ipkg-opt install vncrepeater
Installing vncrepeater (0.12-1) to /opt/...
Downloading http://downloads.openwrt.org/backports/rc5/vncrepeater_0.12-1_mipsel.ipk
Installing uclibc++ (0.1.11-2) to /opt/...
Downloading http://downloads.openwrt.org/whiterussian/packages/uclibc++_0.1.11-2_mipsel.ipk
ipkg: /usr/lib/libuClibc++-0.1.11.so: Read-only file system
ipkg: Cannot create symlink from ./usr/lib/libuClibc++.so.0 to 'libuClibc++-0.1.11.so': Read-only file system
ipkg: /usr/sbin/vncrepeater: Read-only file system
ipkg: /etc/vncrepeater.conf: Read-only file system
ipkg: /etc/init.d/S60vncrepeater: Read-only file system
Configuring uclibc++
Configuring vncrepeater
Successfully terminated.
how do i get write access on
/etc/
/etc/init.d/
/usr/sbin/
/usr/lib/
or how to move on....
/skipper.dk
Ipkg-opt can only be used for packages from ipkg.nslu2-linux.org repository! Other (OpenWRT) packages should not be installed with ipkg-opt. Use standard /bin/ipkg.sh installation method (not shure if it will work).
Posted: Sun Aug 24, 2008 13:15 Post subject: Re: vncrepeater
oleo wrote:
--snip----
Ipkg-opt can only be used for packages from ipkg.nslu2-linux.org repository! Other (OpenWRT) packages should not be installed with ipkg-opt. Use standard /bin/ipkg.sh installation method (not shure if it will work).
Thx for ur reply - will try that and reurn _________________ 1 Asus RT-N16 with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Asus WL-500g Premium with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Synology ds101g+ with ds109 firmware and optware running..
1 Synology DS101 bricked
1 Synology DS409 optware running..
Posted: Sun Aug 24, 2008 13:33 Post subject: Re: vncrepeater
skipper.dk wrote:
oleo wrote:
--snip----
Ipkg-opt can only be used for packages from ipkg.nslu2-linux.org repository! Other (OpenWRT) packages should not be installed with ipkg-opt. Use standard /bin/ipkg.sh installation method (not shure if it will work).
Thx for ur reply - will try that and reurn
this brings me back at whrere i started
"ipkg_install_file: ERROR: uclibc++ depends on the following uninstalled programs:
uclibc++"
file depends on itself ???
Code:
root@xxx DD-WRT:~# /bin/ipkg install vncrepeater
Downloading http://downloads.openwrt.org/whiterussian/packages/uclibc++_0.1.11-2_mipsel.ipk ...
Connecting to downloads.openwrt.org (195.56.146.238:80)
Done.
ipkg_install_file: ERROR: uclibc++ depends on the following uninstalled programs:
uclibc++
ipkg_install_file: You may want to use `ipkg install' to install these.
ipkg_get_install: ERROR: Failed to install /jffs/tmp/ipkg/uclibc++_0.1.11-2_mipsel.ipk
ipkg_get_install: I'll leave it there for you to try a manual installation
root@xxx DD-WRT:~#
what to doo ??
/skipper.dk _________________ 1 Asus RT-N16 with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Asus WL-500g Premium with DD-WRT v24-sp2 (08/12/10) mega - build 14929
1 Synology ds101g+ with ds109 firmware and optware running..
1 Synology DS101 bricked
1 Synology DS409 optware running..
Hi
I've installed man - 1.6f-1 and xinetd - 2.3.14-8 from the Optware feed. But these two packages still need to give lib path /opt/lib otherwise will have
can't resolve symbol '__ctype_b_loc'
error.
Should lib path /opt/lib be built into Optware packages?
Edit: For xinetd, you can set preload lib in the S10xinetd
put this line:
export LD_PRELOAD = /opt/lib
Last edited by skygunner on Mon Jan 19, 2009 1:02; edited 1 time in total
Joined: 18 Nov 2006 Posts: 320 Location: Cali, Colombia
Posted: Sun Jan 18, 2009 17:18 Post subject:
hey
i have been trying to get the ddwrt router signature to work without any luck. i was hoping someone could give me some help.
i did the SD mod on my wrt54gs v2.1 and im running php-thttpd web server. i have the php code for the signature and configured it to access both of my routers internal ip. then i placed it on the www folder that webserver accesses. the file is index.php and its placed on a subfolder called sig.php.
when i go to webserver/sig.php i only get a blank screen and the signature wont show. i also tried with a free hosting (x10hosting.com) and it does work (http://moreins.x10hosting.com/sig.png).
i did make sure php was working on my webserver and it does since the php-ping code from theworldsend.com does work.
can anyone give me some help on this please?
how can i make sure php works ok on this webserver? or, is there any way to modify php settings of the webserver im running??
EDIT: after playing for some time with the php.ini, i believe im missing a image generation library called gd.so. i have tried to look for it but i cant find this specific file. how do i install this library?
thanks
thanks! _________________ WRT54GS v2.1 > v24-sp2 (01/01/09) mega
WRT54GS v5 > v24-sp2 (01/01/09) micro
PPTP, WDS link and SD Mod
Joined: 18 Nov 2006 Posts: 320 Location: Cali, Colombia
Posted: Mon Jan 19, 2009 5:26 Post subject:
sorry for the double post.
i just figured it out. the solution to my problem was much easier than i though...i was dying when looking for gd.so.
i just went back to the opt list and installed php-gd. then when to /opt/lib/ and looked for libgd.so and copied it to /opt/lib/php/extensions.
after that, i configured php.ini and added
extension=libgd.so
this let the php server to generate png images out of a php file.
im a complete newbie on this (this is why i look so suprised)..
ill post my results here later! Very Happy _________________ WRT54GS v2.1 > v24-sp2 (01/01/09) mega
WRT54GS v5 > v24-sp2 (01/01/09) micro
PPTP, WDS link and SD Mod
Joined: 27 Jun 2008 Posts: 88 Location: Europe / Austria / Vienna
Posted: Tue Jun 14, 2011 13:52 Post subject:
Years later ....
/usr/local/lib/ is not writeable. Any Ideas?
Code:
root@DD-WRT:/jffs# ipkg update
mkdir: cannot create directory '//usr/local/lib/': Read-only file system
root@DD-WRT:/jffs# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 5.9M 5.9M 0 100% /
none 512.0K 0 512.0K 0% /dev
/dev/sda1 7.4G 11.6M 7.0G 0% /jffs
root@DD-WRT:/jffs# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512k)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
devpts on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /jffs type ext2 (rw,relatime,errors=continue)
root@DD-WRT:/jffs#