Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Jul 04, 2008 12:58 Post subject:
??? you have uart control. the software does not limit it _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Fri Jul 04, 2008 13:00 Post subject:
here another test for qos (just mini this time)
waiting for results. (in my environment it works) _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
??? you have uart control. the software does not limit it
I don't know how to do that. I know your firmware is not linit. But can't to do because I used to only web inferface.
I can do hardware interface but linux command line is too hard for me. Thanks.
Look, How do you think? if we can make WDS between 2 wireless routers to reading or control anything through wifi, can change board rate for interface with any microcontroller.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sat Jul 05, 2008 9:17 Post subject:
then your mac address is not connected in the same subnet. so its not visible to the router. i have tested this yesterday multiple times and it always worked _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Sat Jul 05, 2008 9:18 Post subject:
shaad wrote:
QoS still not working in the new updated mini version..plus wep key problem
The key is not displayed in the tab..
type in a wep key would be my advise. or generate one using a passphrase. _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Posted: Sat Jul 05, 2008 9:36 Post subject: VINT versions?
Is it possible to get VINT (old wireless driver) versions of dd-wrt.v24_std_special_generic and dd-wrt.v24_mega_special_generic?
This is for usage on a WRT54GS V1.0.
then your mac address is not connected in the same subnet. so its not visible to the router. i have tested this yesterday multiple times and it always worked
What do you mean by not visible BS?
Well for me I have put the same mac address of my NIC I saw in STATUS--LAN tab in dd-wrt..but its still not working
As I posted before the QOS featute of new firmware to limit the bandwidth of users by IP or MAC address is not working on my WHR-G125 router. I am wondering if BrainSlayer is working on this issue to be solved. I really need this to work as my router only supports V.24, Please let me know what is happening.
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Tue Jul 22, 2008 10:37 Post subject:
i'm working on it (and also over hours the last night), please test the attached result _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
